[PCB_FORUM] Re: Silk Screen REF DES with correct component
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 7 Mar 2011 15:39:01 -0500
Hey Andy,
That's been on my wish list for a while.
I usually get into Show Element with Symbols turned on and pass over the
silk to see if the correct symbol lights up.
You can also move each text to see the "rats", and then oops out of it.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
P Think Green only print as needed.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Andy Krawiecki
Sent: Monday, March 07, 2011 11:40 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Silk Screen REF DES with correct component
Hi All,
For those not using AUTO_SILK, but use and manipulate SS ref des text
manually....... Is there a way to verify that the SS REF DES is with
its correct component? I know that sometimes when moving/rotating and
adding leader lines, there might be pilot error in that the REF DES
might be switched with an adjacent component.
Thanks,
Andy
Andy Krawiecki
Senior Printed Circuit Designer
Freedom CAD Services, Inc.
20 Cotton Road, Suite 201
Nashua, N.H. 03063
Direct Phone: 603.864.1310
Main Phone: 603.864.1300
Fax: 603.864.1301
Cell: 603.801.8774
Skype: akrawiecki2
andy.krawiecki@xxxxxxxxxxxxxx <mailto:andy.krawiecki@xxxxxxxxxxxxxx>
Visit us at: www.freedomcad.com <http://www.freedomcad.com/>
Other related posts:
