[PCB_FORUM] Re: RS-274X
- From: "Man Tran" <mtran@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 7 May 2008 13:14:19 -0700
Gary,
Try to set Shape Bounding Box in Artwork Control Form and make sure this
number (measure from board's outline) large enough to cover any lines &
text that you want to show.
-man
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, May 07, 2008 1:08 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] RS-274X
Hey guys,
Allegro PCB 15.5.1, Expert license, Windows XP Pro
Ok, RS-274X question.
I like negative inner planes, and include targets (lines) and a film
description box (lines and text) below the board.
I notice that when I gerber out negative plane film in RS-274X format, I
don't get the targets (lines) nor the film box (lines and text).
I see the same results whether I load the gerbers into an Allegro
database or CAM350.
Is there any way to get the lines and text on a negative film with
RS-274X?
Thanks for any help!
Gary
Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado
amd.com
gary.macindoe@xxxxxxx
Other related posts:
