Hi Sue, Thanks for the reply. Interesting, I'll have to try that. Gary Gary E. MacIndoe PCB Design Engineer Fort Collins, Colorado amd.com gary.macindoe@xxxxxxx ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Reade, Sue Sent: Thursday, May 08, 2008 8:58 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: RS-274X We use the same film description box, I put a negative shape of copper layer over that "text and line" void it, and it shows up as needed. Because of the same issue with targets, I've just given up on them. ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary Sent: Wednesday, May 07, 2008 4:08 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] RS-274X Hey guys, Allegro PCB 15.5.1, Expert license, Windows XP Pro Ok, RS-274X question. I like negative inner planes, and include targets (lines) and a film description box (lines and text) below the board. I notice that when I gerber out negative plane film in RS-274X format, I don't get the targets (lines) nor the film box (lines and text). I see the same results whether I load the gerbers into an Allegro database or CAM350. Is there any way to get the lines and text on a negative film with RS-274X? Thanks for any help! Gary Gary E. MacIndoe PCB Design Engineer Fort Collins, Colorado amd.com gary.macindoe@xxxxxxx