Mitch, take a look at the algroidf.pdf in the online doc. This document is similar to the paper I presented at ICU 2003 and should answer all questions you might have in view IDF, Allegro and Pro-E. To answer your question, it can be done, BUT! ProE is somewhat limited in exporting ECAD stuff. Create a 3D representation in ProE of the shape you want to export and mark it as other_outline (see paper). This will import the shape into Allegro (>= 15.1) to a OtherOutline Subclass. You then just z-copy the shape...... Hope this helps Andy Mitch S. Morey Sent by: 06/29/2004 12:37 PM Please respond to icu-pcb-forum@xxxxxxxxxxxxx To icu-pcb-forum@xxxxxxxxxxxxx cc Subject [PCB_FORUM] Pro-E import of soldermask/solderpaste shapes. Hi all, Thought I'd run this thru ya before I search SL. How do you import things like soldermask/solderpaste SHAPES into Allegro from Pro-E? Our shields require soldermask openings and the solderpaste shapes for stensil creation inside allegro. We want them as shapes (like they're drawn in Pro-E. Now they come across as 2D lines though.) like the PLACEMENT/KEEPOUTS come across, so we don't have to redraw them. Does anyone know how that's done on the pro-e side? Thanks in advance. Good day. ----------------------------------------- This email was sent using http://cafemail.pcbcafe.com . ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------