[PCB_FORUM] Re: Low on available memory, please exit the program.

  • From: "Julian Ungureanu (jungurea)" <jungurea@xxxxxxxxx>
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Wed, 20 Feb 2008 07:31:24 -0800

I have all of the above (Sametime, IE Outlook) running.
I tried batch DRC and I got the same  result.
 
Julian

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of David Kelly
(davidkel)
Sent: Wednesday, February 20, 2008 7:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Low on available memory, please exit the
program.


Julian
 
Do you have much running at the same time, Outlook, Sametime, Firefox or
Explorer .....
Have you tried exiting Allegro and running it stand alone from the
command line ( I haven't
done this in a long time, I assume it still works).
 
Dave
 
David Kelly
davidkel@xxxxxxxxx
720-562-6316
 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Julian
Ungureanu (jungurea)
Sent: Wednesday, February 20, 2008 8:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Low on available memory, please exit the program.


 
I thought I post this here before I open a case with Cadence.
I get this message when updating DRCs.
The brd file is ~100 Mb.
T61P, 2.2 GHz, 4 Gb RAM, Windoze XP
Any ideas why?
 
 
Thanks,
Julian U.

Other related posts:

  1. Home
  2. icu-pcb-forum
  3. Archive
  4. 02-2008