We are using 15.7 and have discovered that even after adding the variable to my env ( and the fact that there are long padstack names in there already) it still tells me "name too long". Is there something else I need to do to allow this to work? Thanks, Dharma KAW/USA Ltd. 39 Simon Street, #4 Nashua, NH 03060 603-886-8711 x212 603-881-8763 fax Confidentiality Notice: This email and any accompanying documents contain information that is confidential, privileged or exempt from disclosure under applicable law and is intended for the exclusive use of the addressee. This information is private and protected by law. If you are not the intended recipient, or have received this email in error, you are hereby notified that any disclosure, copying, distribution or use of the contents of this document in any manner is strictly prohibited. -----Original Message----- From: fxf [mailto:fxf@xxxxxxxxxxx] Sent: Monday, January 05, 2009 2:55 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Long files names in allegro Prior to 16.0, the Allegro long name feature was in earlier adopter mode and supported by setting the env variable, allegro_long_package_name. With this variable names up to 255 chars were supported. Each release added more name types that supported the additional length and I believe by the 15.7 longer padstack names were supported (although padstacks might have been added in an earlier release). In the 15.x releases, you must always have this variable set when using a board with longer names. As of 16.0, the longer names were productized. The variable, allegro_long_name_size = <value> seeds new boards with its initial name limit. Via the Setup->Design Parameters dialog you can change this limit to a larger value. Once a board has been seeded with a longer length, it will maintain this longer length even when it is opened by a user that does not have any env variables set. Mike Finczak wrote: > Deac, > I took a look a sourcelink, and found that 15.x versions > support up to eighteen (18) characters and 16.x versions > support up to thirty (30) characters on a standard > installation. > > Note: The Total number of characters includes the dot > and extension. So the useable padstack file name > length is only fourteen (14) characters. > > Regards, > Mike Finczak > CopperCAD Design > www.CopperCAD.com > 905-488-8958 > > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Deac > Descoteaux > Sent: Monday, January 05, 2009 12:59 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Long files names in allegro > > We've done up to 18 characters without any problems... > > > Deac > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Finczak > Sent: Monday, January 05, 2009 12:46 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Long files names in allegro > > Dharma, > We found out (by mistake) that padstacks with long file > names could be created using SKILL, but could not be > re-opened or edited manually later. > > We eventually had to limit padstack names to fourteen (14) > characters in order to be fully compatible with Allegro. > > How did your customer originally create the padstacks? > > Regards, > Mike Finczak > CopperCAD Design > www.CopperCAD.com > 905-488-8958 > > > > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma > Kemp-Bresett > Sent: Monday, January 05, 2009 12:34 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Long files names in allegro > > Hi Everyone, > We have run into a problem with long file names in 15.5. We have a > customer who uses very long files names for their padstacks. > Previously we were able to add these with no problem ( may have been > using an expert license at the > time) but now we get a "file name too long" error. Is there a switch > in preferences, Or elsewhere, that I am missing that will allow us to > use long file names? > Thanks in advance and I wish you all a Happy New Year!, Dharma > > > > KAW/USA Ltd. > 39 Simon Street, #4 > Nashua, NH 03060 > 603-886-8711 x212 > 603-881-8763 fax > > Confidentiality Notice: This email and any accompanying documents > contain > information that is confidential, privileged or exempt from disclosure > under > applicable law and is intended for the exclusive use of the addressee. > This > information is private and protected by law. If you are not the intended > recipient, or have received this email in error, you are hereby notified > that any disclosure, copying, distribution or use of the contents of > this > document in any manner is strictly prohibited. > > > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------