[PCB_FORUM] Re: How to create a spiral pattern?
- From: "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 22 Jul 2010 08:49:17 -0400
Hi Bill,
The 16.0 Allegro PCB Editor datasheet doesn't show that as being available
for anything but XL and GXL. What versions is it available for
Performance/L? Or, was this a mistake in the datasheet, and it's always
been available for Performance/L?
Thanks,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Zembek
Sent: Thursday, July 22, 2010 8:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to create a spiral pattern?
Hi,
The RF option is available with the Allegro L w/Performance option.
It has many useful and powerful features related to RF designs.
Regards,
Bill Zembek
Technical Support - Allegro Specialist
EMA Design Automation, Inc.
225 Tech Park Drive
Rochester, New York 14623
Phone 585-334-6001 Opt 5
Fax 585-334-6693
www.ema-eda.com
www.timingdesigner.com
CadenceR OrCADR Capture CIS with Digi-KeyR Integration
View a live demo . Register Now!
----------------------------------------------------------------------------
--
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Thursday, July 22, 2010 8:26 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to create a spiral pattern?
Hi,
According to the Allegro PCB Editor 16.0 data sheet, "RF geometry and
circuit creation/editing" is an option only available for XL and GXL.
Though this feature may have additional benefits beyond just the shape
creation, at least for me, writing SKILL routines that provide these shapes
is a lot less expensive.
Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of EricGraser
Sent: Monday, July 19, 2010 11:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to create a spiral pattern?
Hi !
did anyone try Allegro RF PCB, if you just need a spiral pattern.
Eric Chen
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Monday, July 19, 2010 10:13 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to create a spiral pattern?
No takers? The only way I know of to create a spiral pattern (not with
variable trace widths) is add connect and use arcs. If you do need variable
width, creating a shape with arcs should do it.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of O Migs
Sent: Friday, July 16, 2010 11:57 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to create a spiral pattern?
Does anyone have a method to create a spiral cline pattern in Allegro?
-oscar
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 5291 (20100719) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 5291 (20100719) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 5291 (20100719) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
Other related posts:
