[PCB_FORUM] Re: Chasing DRCs... Vias to shape.
- From: <george.h.patrick@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 17 May 2006 12:40:45 -0700
ROFLMAO!
--
George Patrick
Tektronix, Inc.
Central Engineering, Engineering Design Services
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
chris.ball@xxxxxxxxx
Sent: Wednesday, May 17, 2006 12:16
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Chasing DRCs... Vias to shape.
C A D E N C E
Chasing Around Drc's Essentially Neverending Can't Explain
-Chris
"Gene Carman"
<gcarman@xxxxxxxxxxxxxxx> To:
<icu-pcb-forum@xxxxxxxxxxxxx>
Sent by: cc:
icu-pcb-forum-bounce@freel Subject:
[PCB_FORUM] Chasing DRCs... Vias to shape.
ists.org
05/17/2006 02:25 PM
Please respond to
icu-pcb-forum
Using 15.2, not ready to move to 15.5. Working on a design that has
fill
(shapes) on every layer (mixed signal analog).
Very frustrated that Allegro is not clearing away fill from all the
vias,
but is smart enough to make DRCs where the problem exists (D'oh!). But
the
odd thing is that when I do a local remove of the fill to correct the
DRC,
it jumps to another via. I HAVE to CHASE the DRCs... What a
frustrating
"game."
I have checked the database... often.
Anyone else see anything like this?
I am using dynamic shapes in RS-274 mode. Running in Win2K.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to
its
sender at the above address and destroy it."
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
