It could be the shape area around the pin, try adjusting your pull back, some trail and error inputs for the smd/ thru pin, via, cline, shape etc....you might try setting all to zero, then tweak it out 10 mils at a time. Although you want 8, you can't always get it, due the area around the pin, and depending on how much the pull back is, ________________________________ From: Jean Bratton [mailto:jean.bratton@xxxxxxxxxxxxxx] Sent: Monday, November 15, 2004 2:15 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] 8-way connections Hi folks, I have a surface mount DC-DC Converter with round pads which I would like to connect to a top surface plane with an 8-way connection. I can get it to work if I choose the "8 way connect" under the shape parameters for smd pins, but I really don't want all my smd pins to follow this rule, just this pin. I've tried to attach the Dyn_Thermal_Con_Type = 8_way and/or the Dyn_thermal_Best_Fit = True properties to the pin, but I still only get 4 connections. Any idea what else I might try? Thanks for the help! Jean