[PCB_FORUM] Re: 3rd Party Netlist
- From: Tim Woytek <tim.woytek@xxxxxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 5 Apr 2012 15:06:16 +0000
It can be found here.
[cid:image001.png@01CD1313.BA8CFA00]
[cid:image002.png@01CD1313.BA8CFA00]
Regards,
Tim Woytek
Senior PCB Designer
Freedom CAD Services, Inc.
Office: 214.495.0296
Cell: 469.667.1377
Skype: tim_at_fcs
Email: tim.woytek@xxxxxxxxxxxxxx
visit us at http://www.freedomcad.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Thursday, April 05, 2012 9:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 3rd Party Netlist
Hey guys,
As usual, the Cadence Help is only so helpful!
I want to create a 3rd party netlist file (i.e. not schematic driven), and the
Help mentions the "Transferring Logic Design Data user guide in your
documentation set" (in yellow below).
Does anyone know where this "documentation set" is located, or have an example
format for a netlist file?
Thanks for any help
[cid:image003.jpg@01CD1313.BA8CFA00]
Regards,
Gary MacIndoe
Senior PCB Design Engineer
EbD R&D Hardware
Surgical Solutions Group
Covidien
5920 Longbow Drive
M/S A20
Boulder, CO 80301
303.476.7458
www.covidien.com<http://www.covidien.com>
Other related posts:
