Carl, you need 620 to get design partitioning. Randy -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Musetti, Carl Sent: Monday, December 12, 2005 4:41 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: 15.5.1 Mike what did you upgrade from I'm on 220 and curious as to what the cost would be, you also get the design partioning tool with 610 right? -----Original Message----- From: Michael.Catrambone@xxxxxxxxxx [mailto:Michael.Catrambone@xxxxxxxxxx] Sent: Monday, December 12, 2005 5:11 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: 15.5.1 One thing to note, the New DFA tool is only available if you are using Allegro 610 or higher. We just upgraded our current Allegro licenses to Allegro 610 so we can get the functionality. Mike "Musetti, Carl" <cmusetti@xxxxxxxxxxxxxxx>@freelists.org on 12/12/2005 03:48:44 PM Please respond to icu-pcb-forum@xxxxxxxxxxxxx Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx To: <icu-pcb-forum@xxxxxxxxxxxxx> cc: Subject: [PCB_FORUM] Re: 15.5.1 This is a part of the new DFA tool -----Original Message----- From: Gene Carman [mailto:gcarman@xxxxxxxxxxxxxxx] Sent: Monday, December 12, 2005 4:38 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: 15.5.1 I was under the impression that 15.5 was going to have a spreadsheet like constraint tool for parts placement, that would allow the designer to have different rules for different part types and would be "live" like the routing DRCs... not post placement batch driven. Is this not the case? -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard moffat Sent: Monday, December 12, 2005 1:01 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: 15.5.1 I agree. This would be really useful. You can define parallelism in the CM, but I believe I'm correct in saying it doesn't DRC in real-time. (Can someone verify this?) I also take it you mean for edge-coupled and not broadside. (I thing broadside would be a whole new can of worms.) >>>ONE THAT I WOULD LIKE TO PROPOSE FOR PRIORITY CONSIDERATION - ROUTE AND SLIDE WORKING WITH PARALLELISM CONSTRAINTS What's the list's opinions'? >>> david@xxxxxxxxxxxxxx 13/12/2005 9:42 a.m. >>> Don't think so, but have not checked sourcelink this week. The list below seems to be complete ... ... Best Regards David Greig ______________________________ ... www.gigadyne.co.uk <http://www.gigadyne.co.uk/> ______________________________ _____ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JACK KELLY ... we don't have 15.5.1 loaded yet. is there a way to read the what's new for release 15.5.1 prior to down loading it? _____ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of rjbzxr@xxxxxxxxxxxx Sent: Monday, December 12, 2005 8:41 AM To: icu-pcb-forum@xxxxxxxxxxxxx ... ... NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesyn Research Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesyn Research. (See attached file: C.htm) ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------