[PCB_FORUM] Re: 15.5.1

  • From: rjbzxr@xxxxxxxxxxxx
  • To: icu-pcb-forum@xxxxxxxxxxxxx
  • Date: Tue, 13 Dec 2005 04:28:17 -0500

 I have also uploaded the "What's New" PDF Document which gets installed for 
Allegro 
 
\FYI
 
-----Original Message-----
From: rjbzxr@xxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Tue, 13 Dec 2005 04:24:31 -0500
Subject: [PCB_FORUM] Re: 15.5.1


Design Partition is in Allegro 230 and Allegro 620..
 
But DFA is only in the 600 series
 
 
 
-----Original Message-----
From: Gene Carman <gcarman@xxxxxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Mon, 12 Dec 2005 15:26:00 -0800
Subject: [PCB_FORUM] Re: 15.5.1


There is a 620?

I have 610, but what is 620?



Does anybody have a quick list of the limits of each version?



-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]
Sent: Monday, December 12, 2005 3:06 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.5.1


Carl, you need 620 to get design partitioning.

Randy


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Musetti, Carl
Sent: Monday, December 12, 2005 4:41 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.5.1

Mike what did you upgrade from I'm on 220 and curious as to what the
cost would be, you also get the design partioning tool with 610 right?

-----Original Message-----
From: Michael.Catrambone@xxxxxxxxxx
[mailto:Michael.Catrambone@xxxxxxxxxx]
Sent: Monday, December 12, 2005 5:11 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.5.1




One thing to note, the New DFA tool is only available
if you are using Allegro 610 or higher.  We just upgraded
our current Allegro licenses to Allegro 610 so we can
get the functionality.

Mike





"Musetti, Carl" <cmusetti@xxxxxxxxxxxxxxx>@freelists.org on 12/12/2005
03:48:44 PM

Please respond to icu-pcb-forum@xxxxxxxxxxxxx

Sent by:    icu-pcb-forum-bounce@xxxxxxxxxxxxx


To:    <icu-pcb-forum@xxxxxxxxxxxxx>
cc:
Subject:    [PCB_FORUM] Re: 15.5.1


This is a part of the new DFA tool

-----Original Message-----
From: Gene Carman [mailto:gcarman@xxxxxxxxxxxxxxx]
Sent: Monday, December 12, 2005 4:38 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.5.1


I was under the impression that 15.5 was going to have a spreadsheet
like
constraint tool for parts placement, that would allow the designer to
have
different rules for different part types and would be "live" like the
routing DRCs... not post placement batch driven.

Is this not the case?

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard moffat
Sent: Monday, December 12, 2005 1:01 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.5.1



I agree.  This would be really useful.

You can define parallelism in the CM, but I believe I'm correct in
saying
it doesn't DRC in real-time.  (Can someone verify this?)

I also take it you mean for edge-coupled and not broadside.  (I thing
broadside would be a whole new can of worms.)



>>>ONE THAT I WOULD LIKE TO PROPOSE FOR PRIORITY CONSIDERATION - ROUTE
AND
SLIDE WORKING WITH PARALLELISM CONSTRAINTS
What's the list's opinions'?

>>> david@xxxxxxxxxxxxxx 13/12/2005 9:42 a.m. >>>

Don't think so, but have not checked sourcelink this week.

The list below seems to be complete


...
...

Best Regards

David Greig
______________________________

...

www.gigadyne.co.uk <http://www.gigadyne.co.uk/>
______________________________


  _____

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JACK KELLY
...


we don't have 15.5.1 loaded yet. is there a way to read the what's new
for
release 15.5.1 prior to down loading it?

  _____

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
rjbzxr@xxxxxxxxxxxx
Sent: Monday, December 12, 2005 8:41 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
...
...



NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.

(See attached file: C.htm)


-----------------------------------------------------------
To subscribe/unsubscribe: 
    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    with a subject of subscribe or unsubscribe

To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    with a subject of subscribe or unsubscribe

To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
    with a subject of subscribe or unsubscribe

To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------



Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com 
___________________________________________________
Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com

Other related posts: