[ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times
- From: Walter Katz <wkatz@xxxxxxxxxxxxx>
- To: "Arpad_Muranyi@xxxxxxxxxx" <Arpad_Muranyi@xxxxxxxxxx>, "ibis-macro@xxxxxxxxxxxxx" <ibis-macro@xxxxxxxxxxxxx>
- Date: Thu, 6 Jan 2022 19:30:32 +0000
Arpad,
I think the following is clearer.
“In the case of a receiver without a CDR, it is possible for only -1 to ever be
output during all AMI_GetWave calls.”
With:
“If an Rx AMI_GetWave only outputs -1 during all AMI_GetWave calls then the
model does not output clock times. It is recommended that all Rx AMI_GetWave
(except Redriver Rx models) output clock times. Any model that has the reserved
parameter Rx_Use_Clock_Input must output clock times.”
Walter
Walter Katz
Work 508.647-7633
Cell 720.417-3762
[Description: Description: Visit MathWorks.com]
From: ibis-macro-bounce@xxxxxxxxxxxxx <ibis-macro-bounce@xxxxxxxxxxxxx> On
Behalf Of Muranyi, Arpad
Sent: Thursday, January 6, 2022 1:30 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return
clock times
Walter,
Good point. But I am not sure what in my BIRD is saying that they should.
Could you point out more specifically what I need to change in the BIRD?
Thanks,
Arpad
===============================================================
From: Walter Katz <wkatz@xxxxxxxxxxxxx<mailto:wkatz@xxxxxxxxxxxxx>>
Sent: Thursday, January 6, 2022 4:04 AM
To: Muranyi, Arpad <Arpad_Muranyi@xxxxxxxxxx<mailto:Arpad_Muranyi@xxxxxxxxxx>>;
ibis-macro@xxxxxxxxxxxxx<mailto:ibis-macro@xxxxxxxxxxxxx>
Subject: RE: BIRD draft to require clocked Rx AMI models to return clock times
Arpad,
Rx Redrivers need not, nor should not, return clock times.
Walter
Walter Katz
Work 508.647-7633
Cell 720.417-3762
[Description: Description: Visit MathWorks.com]
From: ibis-macro-bounce@xxxxxxxxxxxxx<mailto:ibis-macro-bounce@xxxxxxxxxxxxx>
<ibis-macro-bounce@xxxxxxxxxxxxx<mailto:ibis-macro-bounce@xxxxxxxxxxxxx>> On
Behalf Of Muranyi, Arpad
Sent: Wednesday, January 5, 2022 11:40 PM
To: ibis-macro@xxxxxxxxxxxxx<mailto:ibis-macro@xxxxxxxxxxxxx>
Subject: [ibis-macro] BIRD draft to require clocked Rx AMI models to return
clock times
Hello Everyone,
Attached is “yet another” BIRD draft to make it required for clocked Rx AMI
models to
return clock times. I also included verbiage to discourage model makers from
omitting
the CDR in normal AMI models, and to highly recommend the usage of the new
reserved
parameter Rx_Decision_Time.
If possible, I would like to discuss this BIRD draft in the next ATM meeting
also. Please
take a few moments and read it carefully so we can make any corrections if
necessary.
Questions/comments/suggestions are welcome and much appreciated.
Thanks,
Arpad
===========================================================================
- Follow-Ups:
- References:
- [ibis-macro] BIRD draft to require clocked Rx AMI models to return clock times
- From: Muranyi, Arpad
- [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times
- From: Walter Katz
- [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times
- From: Muranyi, Arpad
- [ibis-macro] BIRD draft to require clocked Rx AMI models to return clock times
Other related posts:
- » [ibis-macro] BIRD draft to require clocked Rx AMI models to return clock times- Muranyi, Arpad
- » [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times- Walter Katz
- » [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times- Muranyi, Arpad
- » [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times - Walter Katz
- » [ibis-macro] Re: BIRD draft to require clocked Rx AMI models to return clock times- Muranyi, Arpad
