Hello, If I don't have wireshark-1.0.0-hip.patch in patches/ethereal/wireshark-1.0.0-hip.patch, it means I can't use wireshark-1.0.0?? I can use only 0.99?? > Date: Thu, 12 Jun 2008 16:40:07 +0300 > From: andrey.khurri@xxxxxxx > To: hipl-users@xxxxxxxxxxxxx > Subject: [hipl-users] Re: HIPL+ ubuntu > > Thank you Samu and Dongsu for pointing out the status with Wireshark patches > > Andrey > > > Varjonen Samu wrote: > > Hi, > > > > Here, this patch from hipl sources has the correct protocol number and > > is the one most up to date (there is some UDP stuff still to be > > figured out). > > > > patches/ethereal/wireshark-1.0.0-hip.patch > > > > Varjonen Samu wrote: > >> Hi, > >> > >> You can also take the wireshark patches from the hipl sources under > >> /patches/ethereal. > >> > >> BR, > >> SAMU > >> > >> Lina wrote: > >>> Thanks Andrey, > >>> > >>> Just if you can, can you give me other links for wireshark because > >>> those ones give corrupted files. > >>> > >>> > >>> > Date: Thu, 12 Jun 2008 11:39:28 +0300 > >>> > From: andrey.khurri@xxxxxxx > >>> > To: hipl-users@xxxxxxxxxxxxx > >>> > Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > >>> > Hi Lina, > >>> > > >>> > To check whether the HIP base exchange has been performed you can > >>> use a > >>> > network analyzer, for instance, tcpdump or even better graphical > >>> > Wireshark. The latter has HIP patches provided by Boeing and can > >>> display > >>> > HIP packets as well: > >>> > > >>> > http://hipserver.mct.phantomworks.org/ethereal.html > >>> > > >>> > I am not sure though if the current patch for Wireshark reflects > >>> changes > >>> > of HIP protocol number (253 -> 139). > >>> > > >>> > With tcpdump you can run the following command to see HIP only > >>> traffic: > >>> > "tcpdump -n -i any esp or proto 139 or port 50500" > >>> > > >>> > If you resolve your hostname to an IP address at least locally > >>> (e.g. in > >>> > /etc/hosts) your test with hostname should work then. > >>> > > >>> > Regards, > >>> > Andrey > >>> > > >>> > > >>> > Lina wrote: > >>> > > Hello, > >>> > > > >>> > > I think finally I get some thing. > >>> > > > >>> > > In responder, > >>> > > > >>> > > test/conntest-server tcp 900 > >>> > > debug(debug.c:671@hip_print_hit): local addr: > >>> > > 0000:0000:0000:0000:0000:0000:0000:0000 > >>> > > debug(debug.c:671@hip_print_hit): peer addr: > >>> > > 2001:0018:53cf:c467:560d:5ddc:80fb:8627 > >>> > > Client sends: ;TTTT > >>> > > Client has been replied. > >>> > > > >>> > > In initiator, > >>> > > > >>> > > test/conntest-client 3ffe::1 tcp 900 > >>> > > info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR and INFO > >>> > > debugging messages > >>> > > info(debug.c:174@hip_set_auto_logdebug): Displaying all > >>> debugging messages > >>> > > debug(getaddrinfo.c:1395@getaddrinfo): name='3ffe::1' > >>> service='900' > >>> > > debug(getaddrinfo.c:962@gaih_inet_get_name): The name to > >>> resolve is an > >>> > > IPv6 > >>> > > Input some text, press enter and ctrl+d > >>> > > ;TTTT > >>> > > debug(debug.c:671@hip_print_hit): Addr given to connect: > >>> > > 3ffe:0000:0000:0000:0000:0000:0000:0001 > >>> > > info(conntest.c:389@main_client_gai): !!!! conntest.c > >>> Connecting... > >>> > > After call conntest.c: connect to 3ffe::1 > >>> > > connect ret=0 errno=0 > >>> > > connect took 0.851 sec > >>> > > connect took 0.851 sec > >>> > > === connection test result: OK === > >>> > > > >>> > > I just want to be sure that this mean that every thing is OK, > >>> and PLZ > >>> > > if you can tell me how can I do to show my HIP packets, I will > >>> be so > >>> > > grateful. The result I get now doesn't show any of the fields of > >>> > > I1,I2,R1 et R2. > >>> > > > >>> > > Thanks so much for you all for your patience. > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > From: linalinaa@xxxxxxxxxx > >>> > > > To: hipl-users@xxxxxxxxxxxxx > >>> > > > Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > > Date: Wed, 11 Jun 2008 14:23:12 +0200 > >>> > > > > >>> > > > > >>> > > > And when i put directly the IPV6 address of responder in > >>> > > conntest-client, I get this: > >>> > > > > >>> > > > [root@localhost ~]# ip xfrm state > >>> > > > src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > replay-window 0 > >>> > > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 > >>> dport 990 > >>> > > > src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > replay-window 0 > >>> > > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 > >>> dport 990 > >>> > > > src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > replay-window 0 > >>> > > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 > >>> dport 990 > >>> > > > src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > replay-window 0 > >>> > > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 > >>> dport 990 > >>> > > > src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > replay-window 0 > >>> > > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 > >>> dport 990 > >>> > > > > >>> > > > > >>> > > > > >>> > > > [root@localhost ~]# ip xfrm policy > >>> > > > src 2001:10::/28 dst 2001:10::/28 > >>> > > > dir in priority 0 ptype main > >>> > > > tmpl src :: dst :: > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst > >>> > > 2001:16:5c7:aa3:ceef:5886:3b22:7c71/128 > >>> > > > dir in priority 0 ptype main > >>> > > > tmpl src 3ffe::2 dst 3ffe::3 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst > >>> > > 2001:1d:9d87:6693:4825:dd7:58d:1e24/128 > >>> > > > dir in priority 0 ptype main > >>> > > > tmpl src 3ffe::2 dst 3ffe::3 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst > >>> > > 2001:13:1b54:2028:c289:3244:60b2:83/128 > >>> > > > dir in priority 0 ptype main > >>> > > > tmpl src 3ffe::2 dst 3ffe::3 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst > >>> > > 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 > >>> > > > dir in priority 0 ptype main > >>> > > > tmpl src 3ffe::2 dst 3ffe::3 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:10::/28 dst 2001:10::/28 > >>> > > > dir out priority 0 ptype main > >>> > > > tmpl src :: dst :: > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:16:5c7:aa3:ceef:5886:3b22:7c71/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 > >>> > > > dir out priority 0 ptype main > >>> > > > tmpl src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1d:9d87:6693:4825:dd7:58d:1e24/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 > >>> > > > dir out priority 0 ptype main > >>> > > > tmpl src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:13:1b54:2028:c289:3244:60b2:83/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 > >>> > > > dir out priority 0 ptype main > >>> > > > tmpl src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst > >>> > > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 > >>> > > > dir out priority 0 ptype main > >>> > > > tmpl src 3ffe::3 dst 3ffe::2 > >>> > > > proto (null) reqid 0 mode transport > >>> > > > > >>> > > > ---------------------------------------- > >>> > > > > Date: Wed, 11 Jun 2008 14:19:49 +0300 > >>> > > > > From: laser.ru@xxxxxxxxx > >>> > > > > To: hipl-users@xxxxxxxxxxxxx > >>> > > > > Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > > > > >>> > > > > Sorry, > >>> > > > > > >>> > > > > Please, show those after command "test/conntest-client > >>> responder > >>> > > tcp 999". > >>> > > > > > >>> > > > > On Wed, Jun 11, 2008 at 2:18 PM, Andrey Lukyanenko wrote: > >>> > > > >> Hello, > >>> > > > >> > >>> > > > >> After you typed test/conntest-client 3ffe::3 tcp 999, can you > >>> > > show as the > >>> > > > >> results of commands 'ip xfrm state', 'ip xfrm policy'. > >>> > > > >> > >>> > > > >> Thank you. > >>> > > > >> > >>> > > > >> On Wed, Jun 11, 2008 at 1:02 PM, Lina wrote: > >>> > > > >>> > >>> > > > >>> Hello, > >>> > > > >>> > >>> > > > >>> Thanks for your reply. > >>> > > > >>> for the files, I just modified those of the iniator, > >>> > > > >>> > >>> > > > >>> 3ffe::3 responder > >>> > > > >>> > >>> > > > >>> and > >>> > > > >>> > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001 responder > >>> > > > >>> > >>> > > > >>> > >>> > > > >>> But when i type: > >>> > > > >>> > >>> > > > >>> test/conntest-client 3ffe::3 tcp 999 > >>> > > > >>> > >>> > > > >>> info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR > >>> and > >>> > > INFO debugging messages > >>> > > > >>> info(debug.c:174@hip_set_auto_logdebug): Displaying all > >>> > > debugging messages > >>> > > > >>> debug(getaddrinfo.c:1395@getaddrinfo): name='3ffe::3' > >>> service='999' > >>> > > > >>> debug(getaddrinfo.c:962@gaih_inet_get_name): The name to > >>> resolve > >>> > > is an IPv6 > >>> > > > >>> Input some text, press enter and ctrl+d > >>> > > > >>> ;TTTTTTTT > >>> > > > >>> debug(debug.c:671@hip_print_hit): Addr given to connect: > >>> > > 3ffe:0000:0000:0000:0000:0000:0000:0003 > >>> > > > >>> info(conntest.c:389@main_client_gai): !!!! conntest.c > >>> Connecting... > >>> > > > >>> > >>> > > > >>> and it's blocked there. > >>> > > > >>> > >>> > > > >>> While if i put: > >>> > > > >>> > >>> > > > >>> test/conntest-client responder tcp 999 > >>> > > > >>> > >>> > > > >>> info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR > >>> and > >>> > > INFO debugging messages > >>> > > > >>> info(debug.c:174@hip_set_auto_logdebug): Displaying all > >>> > > debugging messages > >>> > > > >>> debug(getaddrinfo.c:1395@getaddrinfo): name='nahla-laptop' > >>> > > service='999' > >>> > > > >>> debug(getaddrinfo.c:1012@gaih_inet_get_name): The name is > >>> not an > >>> > > IPv4 or IPv6 address, resolve name (!AI_NUMERICHOST) > >>> > > > >>> Input some text, press enter and ctrl+d > >>> > > > >>> ;FFFF > >>> > > > >>> > >>> > > > >>> I get nothing, > >>> > > > >>> > >>> > > > >>> I TRIED many things but till now I didn't find the mistake. > >>> > > > >>> Is there any other way to verify or test??? > >>> > > > >>> > >>> > > > >>> Plz any help > >>> > > > >>> Thanks > >>> > > > >>> ---------------------------------------- > >>> > > > >>>> Date: Tue, 10 Jun 2008 17:04:44 +0200 > >>> > > > >>>> From: dpark1978@xxxxxxxxx > >>> > > > >>>> To: hipl-users@xxxxxxxxxxxxx > >>> > > > >>>> Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > > >>>> > >>> > > > >>>> Hi, > >>> > > > >>>> > >>> > > > >>>> Your current peer address is not HIT, but just an IPv6 > >>> address. > >>> > > It means > >>> > > > >>>> your HIT configurations in /etc/hip/hosts and /etc/hosts > >>> are > >>> > > somehow not > >>> > > > >>>> correct. > >>> > > > >>>> > >>> > > > >>>> Try to make sure again that HIT values are matching with > >>> each > >>> > > other, on > >>> > > > >>>> both hosts. > >>> > > > >>>> > >>> > > > >>>> By the way, note also that the HIP protocol number is > >>> 253 for > >>> > > the hipl > >>> > > > >>>> release 1.0.3, in contrast to 139 for the development > >>> branches > >>> > > explained > >>> > > > >>>> on the manual. Therefore you have to run tcpdump like that: > >>> > > > >>>> > >>> > > > >>>> $ tcpdump -n -v esp or proto 253 or port 50500 > >>> > > > >>>> > >>> > > > >>>> Dongsu > >>> > > > >>>> > >>> > > > >>>> Lina wrote: > >>> > > > >>>>> Now I get this: > >>> > > > >>>>> > >>> > > > >>>>> test/conntest-server tcp > >>> 1120debug(debug.c:671@hip_print_hit): > >>> > > local addr: > >>> > > > >>> 0000:0000:0000:0000:0000:0000:0000:0000debug(debug.c:671@hip_print_hit): > >>> > >>> > > peer addr: 3ffe:0000:0000:0000:0000:0000:0000:0002Client sends: > >>> > > ;TESTClient has been replied. > >>> > > > >>>>> > >>> > > > >>>>> and > >>> > > > >>>>> > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): Addr given to connect: > >>> > > > >>> 3ffe:0000:0000:0000:0000:0000:0000:0003info(conntest.c:389@main_client_gai): > >>> > >>> > >>> > > !!!! conntest.c Connecting...After call conntest.c: connect to > >>> > > 3ffe::3connect ret=0 errno=0connect took 6.010 secconnect took > >>> 6.010 > >>> > > sec=== connection test result: OK === > >>> > > > >>>>> > >>> > > > >>>>> and > >>> > > > >>>>> > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): Addr given to connect: > >>> > > 3ffe:0000:0000:0000:0000:0000:0000:0003 > >>> > > > >>>>> info(conntest.c:389@main_client_gai): !!!! conntest.c > >>> > > Connecting... > >>> > > > >>>>> After call conntest.c: connect to 3ffe::3 > >>> > > > >>>>> connect ret=0 errno=0 > >>> > > > >>>>> connect took 6.010 sec > >>> > > > >>>>> connect took 6.010 sec > >>> > > > >>>>> === connection test result: OK === > >>> > > > >>>>> [16:43:26] … debug(builder.c:902@hip_dump_msg): > >>> > > --------------- MSG START ------------------ > >>> > > > >>>>> debug(builder.c:906@hip_dump_msg): Msg type : HIP_I1 (1) > >>> > > > >>>>> debug(builder.c:907@hip_dump_msg): Msg length: 40 > >>> > > > >>>>> debug(builder.c:908@hip_dump_msg): Msg err: 0 > >>> > > > >>>>> debug(builder.c:909@hip_dump_msg): Msg controls: 0x0000 > >>> > > > >>>>> debug(builder.c:929@hip_dump_msg): ---------------- MSG > >>> END > >>> > > -------------------- > >>> > > > >>>>> debug(output.c:791@hip_send_raw): Using IPv6 raw socket > >>> > > > >>>>> debug(output.c:797@hip_send_raw): local address given > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): src6: > >>> > > 3ffe:0000:0000:0000:0000:0000:0000:0002 > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): dst6: > >>> > > 3ffe:0000:0000:0000:0000:0000:0000:0003 > >>> > > > >>>>> debug(builder.c:1654@hip_checksum_packet): Checksumming 40 > >>> > > bytes of data. > >>> > > > >>>>> debug(output.c:884@hip_send_raw): sent=40/40 ipv4=0 > >>> > > > >>>>> debug(output.c:885@hip_send_raw): Packet sent ok > >>> > > > >>>>> debug(output.c:106@hip_send_i1): err after sending: 0. > >>> > > > >>>>> debug(user.c:551@hip_handle_user_msg): No response sent > >>> > > > >>>>> debug(oppdb.c:489@hip_handle_opp_fallback): Timeout for > >>> opp > >>> > > entry, falling back to > >>> > > > >>>>> debug(oppdb.c:491@hip_handle_opp_fallback): Unblock > >>> returned 0 > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): HIT1: > >>> > > 2001:0017:bd5f:79e5:3807:46a3:0000:0000 > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): HIT2: > >>> > > 2001:001b:0c44:8784:2d1b:96b2:b6c5:ad41 > >>> > > > >>>>> debug(hadb.c:74@hip_hadb_rem_state_hit): > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): our HIT: > >>> > > 2001:001b:0c44:8784:2d1b:96b2:b6c5:ad41 > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): peer HIT: > >>> > > 2001:0017:bd5f:79e5:3807:46a3:0000:0000 > >>> > > > >>>>> debug(hadb.c:2439@hip_hadb_delete_state): ha=0x0x80bbb88 > >>> > > > >>>>> debug(hadb.c:2353@hip_hadb_delete_inbound_spi): SPI=0x0 > >>> > > > >>>>> debug(hadb.c:2400@hip_hadb_delete_outbound_spi): > >>> > > entry=0x0x80bbb88 SPI=0x0 > >>> > > > >>>>> debug(oppdb.c:45@hip_oppdb_entry_clean_up): Del peer info > >>> > > returned 617 > >>> > > > >>>>> error(maintenance.c:98@hip_scan_opp_fallback): > >>> for_each_ha err. > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> But I want to see the HIP BE packets, and the tcpdump > >>> shows > >>> > > nothing. > >>> > > > >>>>> > >>> > > > >>>>> What should I do?? > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> From: linalinaa@xxxxxxxxxx > >>> > > > >>>>> To: hipl-users@xxxxxxxxxxxxx > >>> > > > >>>>> Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > > >>>>> Date: Tue, 10 Jun 2008 14:13:24 +0200 > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> > >>> > > > >>>>> Thank you Dongsu sooo much. > >>> > > > >>>>> I installed HIPl on ubuntu and now have my 2 hosts one > >>> fedora > >>> > > and one ubuntu > >>> > > > >>>>> I try the connection, i get this: > >>> > > > >>>>> info(builder.c:926@hip_dump_msg): > >>> > > Contents:0x0000000100020005info(builder.c:927@hip_dump_msg): > >>> > > Padding:0x00000000debug(builder.c:925@hip_dump_msg): Parameter > >>> > > type:HIP_PARAM_HOST_ID (705). Total length: 160 (4 type+length, > >>> 153 > >>> > > content, 3 padding).info(builder.c:926@hip_dump_msg): > >>> > > > >>> Contents:0x0088100d0202ff0503010001b913040ef9e48d85182e13d49bef65ec53fb19bb0a9ba3886093f1fcc8ee6ca688c5515485fed9b601c566770707003e1b383ab8f7b9d9c085031eb3fd80200d9642ec538475458d96f328a276b3f993d80f98b6defa6ca7cd51b929d37d6c9ed46254da3d45a2308469c9a3289552b3f8976f636a8055100c46ed73286f3ba16e61686c612d6c6170746f7000info(builder.c:927@hip_dump_msg): > >>> > >>> > >>> > > Padding:0x000000debug(builder.c:925@hip_dump_msg): Parameter > >>> > > type:HIP_PARAM_HIP_SIGNATURE2 (61633). Total length: 136 (4 > >>> > > type+length, 129 content, 3 > >>> padding).info(builder.c:926@hip_dump_msg): > >>> > > > >>> Contents:0x0526504fd9ebee8cf2bc82a694140b971599181a25d831333c90b4413b7be1ad2452e1ea72e6a9b9ffb7955abd11e86c4846c20c5ad175fdf324227fc48f1e75e9eced6fbe569d55840d4cf9e8 > >>> > >>> > >>> > > > >>>> > >>> > > > >>> cc654facda8c7cbdb2cc0da6d3250afe5e4ac481279c6bf769e3c703332138c1e16f70b0cbea0e272f84def22326b0d89a59856dinfo(builder.c:927@hip_dump_msg): > >>> > >>> > >>> > > Padding:0x000000debug(builder.c:929@hip_dump_msg): > >>> ---------------- > >>> > > MSG END --------------------debug(output.c:791@hip_send_raw): > >>> Using > >>> > > IPv6 raw socketdebug(output.c:797@hip_send_raw): local address > >>> > > givendebug(debug.c:671@hip_print_hit): src6: > >>> > > > >>> 3ffe:0000:0000:0000:0000:0000:0000:0003debug(debug.c:671@hip_print_hit): > >>> > >>> > > dst6: > >>> > > > >>> 3ffe:0000:0000:0000:0000:0000:0000:0001debug(builder.c:1654@hip_checksum_packet): > >>> > >>> > >>> > > Checksumming 640 bytes of data.debug(output.c:884@hip_send_raw): > >>> > > sent=640/640 ipv4=0debug(output.c:885@hip_send_raw): Packet sent > >>> > > okdebug(input.c:572@hip_receive_control_packet): Done with control > >>> > > packet, err is 0. > >>> > > > >>>>> > >>> > > > >>>>> and > >>> > > > >>>>> > >>> > > > >>>>> debug(debug.c:671@hip_print_hit): HIT1: > >>> > > > >>> 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit): > >>> > >>> > > HIT2: > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire): > >>> > >>> > >>> > > I1 was already sent, ignoringdebug(hipd.c:646@hipd_main): netlink > >>> > > receivedebug(nlink.c:56@hip_netlink_receive): Received a netlink > >>> > > messagedebug(netdev.c:818@hip_netdev_event): handling msg type 23 > >>> > > ifindex=0debug(netdev.c:645@hip_netdev_handle_acquire): Acquire: > >>> > > sending I1 (pid: 0) debug(debug.c:671@hip_print_hit): src HIT: > >>> > > > >>> 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit): > >>> > >>> > > dst HIT: > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(hidb.c:97@hip_get_hostid_entry_by_lhi_and_algo): > >>> > >>> > >>> > > ALGO VALUE :-1, algo value of id entry > >>> > > :3debug(debug.c:671@hip_print_hit): HIT1: > >>> > > > >>> 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit): > >>> > >>> > > HIT2: > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire): > >>> > >>> > >>> > > I1 was already sent, ignoringdebug(h > >>> > > > >>>> ipd.c:646@hipd_main): netlink > >>> > > receivedebug(nlink.c:56@hip_netlink_receive): Received a netlink > >>> > > messagedebug(netdev.c:818@hip_netdev_event): handling msg type 23 > >>> > > ifindex=0debug(netdev.c:645@hip_netdev_handle_acquire): Acquire: > >>> > > sending I1 (pid: 0) debug(debug.c:671@hip_print_hit): src HIT: > >>> > > > >>> 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit): > >>> > >>> > > dst HIT: > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(hidb.c:97@hip_get_hostid_entry_by_lhi_and_algo): > >>> > >>> > >>> > > ALGO VALUE :-1, algo value of id entry > >>> > > :3debug(debug.c:671@hip_print_hit): HIT1: > >>> > > > >>> 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit): > >>> > >>> > > HIT2: > >>> > > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire): > >>> > >>> > >>> > > I1 was already sent, ignoring > >>> > > > >>>>> > >>> > > > >>>>> It seems there's another problem and the tcpdump show > >>> no packets > >>> > > > >>>>> Any help?? > >>> > > > >>>>> > >>> > > > >>>>>> Date: Tue, 10 Jun 2008 12:13:39 +0200 > >>> > > > >>>>>> From: dpark1978@xxxxxxxxx > >>> > > > >>>>>> To: hipl-users@xxxxxxxxxxxxx > >>> > > > >>>>>> Subject: [hipl-users] Re: HIPL+ ubuntu > >>> > > > >>>>>> > >>> > > > >>>>>> Hi, > >>> > > > >>>>>> > >>> > > > >>>>>> so you mean, you added the 3 lines at the end of > >>> > > stdio-lock.h. That's a > >>> > > > >>>>>> wrong way, which changes nothing. > >>> > > > >>>>>> > >>> > > > >>>>>> Do like this: > >>> > > > >>>>>> First, go to the 24th line in > >>> /usr/include/bits/stdio-lock.h, > >>> > > where > >>> > > > >>>>>> "#include " is located. > >>> > > > >>>>>> Second, disable the include line, either by commenting > >>> it out > >>> > > or by > >>> > > > >>>>>> embracing with "#if 0" and "#endif". You could just > >>> remove > >>> > > the line, too. > >>> > > > >>>>>> Third, try compiling hipl again. > >>> > > > >>>>>> > >>> > > > >>>>>> Dongsu > >>> > > > >>>>>> > >>> > > > >>>>>> Lina wrote: > >>> > > > >>>>>>> Hi all, > >>> > > > >>>>>>> > >>> > > > >>>>>>> I try to install HIPL under ubuntu 7.4 > >>> > > > >>>>>>> I used those links > >>> > > > >>>>>>> > >>> > > > >>>>>>> http://hipl.hiit.fi/hipl/release/latest/deb/i386/ > >>> > > > >>>>>>> > >>> > > > >>> http://hipl.hiit.fi/hipl/release/latest/deb/i386/hipl-1.0-3-deb-src/ > >>> > > > >>>>>>> > >>> > > > >>>>>>> And when i type ./configure&& make install > >>> > > > >>>>>>> > >>> > > > >>>>>>> I get this: > >>> > > > >>>>>>> > >>> > > > >>>>>>> In file included from /usr/include/libio.h:171, from > >>> > > /usr/include/stdio.h:72, from /usr/include/resolv.h:64, from > >>> > > getaddrinfo.c:53:/usr/include/bits/stdio-lock.h:24:26: error: > >>> > > lowlevellock.h: No such file or directorygetaddrinfo.c: In > >>> function > >>> > > 'gethosts_hit':getaddrinfo.c:484: warning: assignment from > >>> > > incompatible pointer typegetaddrinfo.c:496: warning: passing > >>> argument > >>> > > 2 of 'opendht_get_key' discards qualifiers from pointer target > >>> > > typemake[2]: *** [getaddrinfo.lo] Error 1 > >>> > > > >>>>>>> > >>> > > > >>>>>>> I found a topic in the list speaking about that, i added > >>> > > > >>>>>>> > >>> > > > >>>>>>> > >>> > > > >>>>>>> > >>> > > > >>>>>>> #if 0 > >>> > > > >>>>>>> #include > >>> > > > >>>>>>> #endif in /usr/include/bits/stdio-lock.h > >>> > > > >>>>>>> > >>> > > > >>>>>>> like that: > >>> > > > >>>>>>> .... > >>> > > > >>>>>>> # define _IO_release_lock(_fp) ; } while (0) > >>> > > > >>>>>>> > >>> > > > >>>>>>> #endif > >>> > > > >>>>>>> #if 0 > >>> > > > >>>>>>> #include > >>> > > > >>>>>>> #endif > >>> > > > >>>>>>> #endif /* bits/stdio-lock.h */ > >>> > > > >>>>>>> > >>> > > > >>>>>>> But I still have the same problem. > >>> > > > >>>>>>> Do any one have any idea??? > >>> > > > >>>>>>> Thanks in advance. > >>> > > > >>>>>>> > >>> > > > >>>>>>> > >>> > > > >>>>>>> > >>> > > > >>>>>>> > >>> > > _________________________________________________________________ > >>> > > > >>>>>>> Faites vous de nouveaux amis grâce à l'annuaire des > >>> profils > >>> > > Messenger ! > >>> > > > >>>>>>> > >>> > > > >>> http://home.services.spaces.live.com/search/?page=searchresults&ss=true&FormId=AdvPeopleSearch&form=SPXFRM&tp=3&sc=2&pg=0&Search.DisplayName=Nom+public&search.gender=&search.age=&Search.FirstName=Pr%C3%A9nom&Search.LastName=Nom&search.location=Lieu&search.occupation=Profession&search.interests=amis&submit=Rechercher > >>> > >>> > >>> > > > >>>>>> > >>> > > > >>>>> > >>> > > > >>>>> Discutez gratuitement avec vos amis en vidéo ! Téléchargez > >>> > > Messenger, c'est gratuit ! > >>> > > > >>>>> > >>> > > > >>>>> > >>> _________________________________________________________________ > >>> > > > >>>>> Caroline vient de mettre à jour son profil Messenger ! > >>> > > Connectez-vous ! > >>> > > > >>>>> > >>> > > > >>> http://login.live.com/login.srf?wa=wsignin1.0&rpsnv=10&ct=1198837564&rver=4.0.1534.0&wp=MBI&wreply=http:%2F%2Fhome.services.spaces.live.com%2F&lc=1036&id=73625 > >>> > >>> > >>> > > > >>>> > >>> > > > >>>> > >>> > > > >>> > >>> > > > >>> > >>> _________________________________________________________________ > >>> > > > >>> Caroline vient de mettre à jour son profil Messenger ! > >>> > > Connectez-vous ! > >>> > > > >>> > >>> > > > >>> http://login.live.com/login.srf?wa=wsignin1.0&rpsnv=10&ct=1198837564&rver=4.0.1534.0&wp=MBI&wreply=http:%2F%2Fhome.services.spaces.live.com%2F&lc=1036&id=73625 > >>> > >>> > >>> > > > >>> > >>> > > > >> > >>> > > > >> > >>> > > > >> > >>> > > > >> -- > >>> > > > >> Best regards, > >>> > > > >> Andrey Lukyanenko. > >>> > > > >> > >>> > > > > > >>> > > > > > >>> > > > > > >>> > > > > -- > >>> > > > > Best regards, > >>> > > > > Andrey Lukyanenko. > >>> > > > > >>> > > > > >>> _________________________________________________________________ > >>> > > > Avec Hotmail, vos e-mails vous suivent partout ! Mettez > >>> Hotmail sur > >>> > > votre mobile ! > >>> > > > http://www.messengersurvotremobile.com/?d=hotmail > >>> > > > >>> > > > >>> ------------------------------------------------------------------------ > >>> > >>> > > Tous vos amis discutent sur Messenger, et vous ? Téléchargez > >>> > > Messenger, c'est gratuit ! <http://www.windowslive.fr/messenger/> > >>> > > >>> > > >>> > -- > >>> > Andrey Khurri > >>> > Researcher > >>> > Helsinki Institute for Information Technology (HIIT) > >>> > Tel +358 50 384 1510 > >>> > firstname.lastname(a)hiit.fi > >>> > > >>> > > >>> > >>> ------------------------------------------------------------------------ > >>> > >>> Avec Windows Live Messenger restez en contact avec tous vos amis ! > >>> Téléchargez Messenger, c'est gratuit ! > >>> <http://www.windowslive.fr/messenger/> > >> > >> > >> > > > > > > > -- > Andrey Khurri > Researcher > Helsinki Institute for Information Technology (HIIT) > Tel +358 50 384 1510 > firstname.lastname(a)hiit.fi > > _________________________________________________________________ Faites vous de nouveaux amis grâce à l'annuaire des profils Messenger ! http://home.services.spaces.live.com/search/?page=searchresults&ss=true&FormId=AdvPeopleSearch&form=SPXFRM&tp=3&sc=2&pg=0&Search.DisplayName=Nom+public&search.gender=&search.age=&Search.FirstName=Pr%C3%A9nom&Search.LastName=Nom&search.location=Lieu&search.occupation=Profession&search.interests=amis&submit=Rechercher