[hipl-users] Re: HIPL+ ubuntu
- From: Lina <linalinaa@xxxxxxxxxx>
- To: <hipl-users@xxxxxxxxxxxxx>
- Date: Thu, 12 Jun 2008 11:53:18 +0200
Thanks Andrey,
Just if you can, can you give me other links for wireshark because those ones
give corrupted files.
> Date: Thu, 12 Jun 2008 11:39:28 +0300
> From: andrey.khurri@xxxxxxx
> To: hipl-users@xxxxxxxxxxxxx
> Subject: [hipl-users] Re: HIPL+ ubuntu
>
> Hi Lina,
>
> To check whether the HIP base exchange has been performed you can use a
> network analyzer, for instance, tcpdump or even better graphical
> Wireshark. The latter has HIP patches provided by Boeing and can display
> HIP packets as well:
>
> http://hipserver.mct.phantomworks.org/ethereal.html
>
> I am not sure though if the current patch for Wireshark reflects changes
> of HIP protocol number (253 -> 139).
>
> With tcpdump you can run the following command to see HIP only traffic:
> "tcpdump -n -i any esp or proto 139 or port 50500"
>
> If you resolve your hostname to an IP address at least locally (e.g. in
> /etc/hosts) your test with hostname should work then.
>
> Regards,
> Andrey
>
>
> Lina wrote:
> > Hello,
> >
> > I think finally I get some thing.
> >
> > In responder,
> >
> > test/conntest-server tcp 900
> > debug(debug.c:671@hip_print_hit): local addr:
> > 0000:0000:0000:0000:0000:0000:0000:0000
> > debug(debug.c:671@hip_print_hit): peer addr:
> > 2001:0018:53cf:c467:560d:5ddc:80fb:8627
> > Client sends: ;TTTT
> > Client has been replied.
> >
> > In initiator,
> >
> > test/conntest-client 3ffe::1 tcp 900
> > info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR and INFO
> > debugging messages
> > info(debug.c:174@hip_set_auto_logdebug): Displaying all debugging messages
> > debug(getaddrinfo.c:1395@getaddrinfo): name='3ffe::1' service='900'
> > debug(getaddrinfo.c:962@gaih_inet_get_name): The name to resolve is an
> > IPv6
> > Input some text, press enter and ctrl+d
> > ;TTTT
> > debug(debug.c:671@hip_print_hit): Addr given to connect:
> > 3ffe:0000:0000:0000:0000:0000:0000:0001
> > info(conntest.c:389@main_client_gai): !!!! conntest.c Connecting...
> > After call conntest.c: connect to 3ffe::1
> > connect ret=0 errno=0
> > connect took 0.851 sec
> > connect took 0.851 sec
> > === connection test result: OK ===
> >
> > I just want to be sure that this mean that every thing is OK, and PLZ
> > if you can tell me how can I do to show my HIP packets, I will be so
> > grateful. The result I get now doesn't show any of the fields of
> > I1,I2,R1 et R2.
> >
> > Thanks so much for you all for your patience.
> >
> >
> >
> >
> >
> > > From: linalinaa@xxxxxxxxxx
> > > To: hipl-users@xxxxxxxxxxxxx
> > > Subject: [hipl-users] Re: HIPL+ ubuntu
> > > Date: Wed, 11 Jun 2008 14:23:12 +0200
> > >
> > >
> > > And when i put directly the IPV6 address of responder in
> > conntest-client, I get this:
> > >
> > > [root@localhost ~]# ip xfrm state
> > > src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > replay-window 0
> > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 dport 990
> > > src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > replay-window 0
> > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 dport 990
> > > src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > replay-window 0
> > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 dport 990
> > > src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > replay-window 0
> > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 dport 990
> > > src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > replay-window 0
> > > sel src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 proto tcp sport 9481 dport 990
> > >
> > >
> > >
> > > [root@localhost ~]# ip xfrm policy
> > > src 2001:10::/28 dst 2001:10::/28
> > > dir in priority 0 ptype main
> > > tmpl src :: dst ::
> > > proto (null) reqid 0 mode transport
> > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst
> > 2001:16:5c7:aa3:ceef:5886:3b22:7c71/128
> > > dir in priority 0 ptype main
> > > tmpl src 3ffe::2 dst 3ffe::3
> > > proto (null) reqid 0 mode transport
> > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst
> > 2001:1d:9d87:6693:4825:dd7:58d:1e24/128
> > > dir in priority 0 ptype main
> > > tmpl src 3ffe::2 dst 3ffe::3
> > > proto (null) reqid 0 mode transport
> > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst
> > 2001:13:1b54:2028:c289:3244:60b2:83/128
> > > dir in priority 0 ptype main
> > > tmpl src 3ffe::2 dst 3ffe::3
> > > proto (null) reqid 0 mode transport
> > > src 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128 dst
> > 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128
> > > dir in priority 0 ptype main
> > > tmpl src 3ffe::2 dst 3ffe::3
> > > proto (null) reqid 0 mode transport
> > > src 2001:10::/28 dst 2001:10::/28
> > > dir out priority 0 ptype main
> > > tmpl src :: dst ::
> > > proto (null) reqid 0 mode transport
> > > src 2001:16:5c7:aa3:ceef:5886:3b22:7c71/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128
> > > dir out priority 0 ptype main
> > > tmpl src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > src 2001:1d:9d87:6693:4825:dd7:58d:1e24/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128
> > > dir out priority 0 ptype main
> > > tmpl src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > src 2001:13:1b54:2028:c289:3244:60b2:83/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128
> > > dir out priority 0 ptype main
> > > tmpl src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > > src 2001:1b:c44:8784:2d1b:96b2:b6c5:ad41/128 dst
> > 2001:1e:34ac:46e3:73c4:c9de:657c:1001/128
> > > dir out priority 0 ptype main
> > > tmpl src 3ffe::3 dst 3ffe::2
> > > proto (null) reqid 0 mode transport
> > >
> > > ----------------------------------------
> > > > Date: Wed, 11 Jun 2008 14:19:49 +0300
> > > > From: laser.ru@xxxxxxxxx
> > > > To: hipl-users@xxxxxxxxxxxxx
> > > > Subject: [hipl-users] Re: HIPL+ ubuntu
> > > >
> > > > Sorry,
> > > >
> > > > Please, show those after command "test/conntest-client responder
> > tcp 999".
> > > >
> > > > On Wed, Jun 11, 2008 at 2:18 PM, Andrey Lukyanenko wrote:
> > > >> Hello,
> > > >>
> > > >> After you typed test/conntest-client 3ffe::3 tcp 999, can you
> > show as the
> > > >> results of commands 'ip xfrm state', 'ip xfrm policy'.
> > > >>
> > > >> Thank you.
> > > >>
> > > >> On Wed, Jun 11, 2008 at 1:02 PM, Lina wrote:
> > > >>>
> > > >>> Hello,
> > > >>>
> > > >>> Thanks for your reply.
> > > >>> for the files, I just modified those of the iniator,
> > > >>>
> > > >>> 3ffe::3 responder
> > > >>>
> > > >>> and
> > > >>>
> > > >>> 2001:001e:34ac:46e3:73c4:c9de:657c:1001 responder
> > > >>>
> > > >>>
> > > >>> But when i type:
> > > >>>
> > > >>> test/conntest-client 3ffe::3 tcp 999
> > > >>>
> > > >>> info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR and
> > INFO debugging messages
> > > >>> info(debug.c:174@hip_set_auto_logdebug): Displaying all
> > debugging messages
> > > >>> debug(getaddrinfo.c:1395@getaddrinfo): name='3ffe::3' service='999'
> > > >>> debug(getaddrinfo.c:962@gaih_inet_get_name): The name to resolve
> > is an IPv6
> > > >>> Input some text, press enter and ctrl+d
> > > >>> ;TTTTTTTT
> > > >>> debug(debug.c:671@hip_print_hit): Addr given to connect:
> > 3ffe:0000:0000:0000:0000:0000:0000:0003
> > > >>> info(conntest.c:389@main_client_gai): !!!! conntest.c Connecting...
> > > >>>
> > > >>> and it's blocked there.
> > > >>>
> > > >>> While if i put:
> > > >>>
> > > >>> test/conntest-client responder tcp 999
> > > >>>
> > > >>> info(debug.c:177@hip_set_auto_logdebug): Displaying ERROR and
> > INFO debugging messages
> > > >>> info(debug.c:174@hip_set_auto_logdebug): Displaying all
> > debugging messages
> > > >>> debug(getaddrinfo.c:1395@getaddrinfo): name='nahla-laptop'
> > service='999'
> > > >>> debug(getaddrinfo.c:1012@gaih_inet_get_name): The name is not an
> > IPv4 or IPv6 address, resolve name (!AI_NUMERICHOST)
> > > >>> Input some text, press enter and ctrl+d
> > > >>> ;FFFF
> > > >>>
> > > >>> I get nothing,
> > > >>>
> > > >>> I TRIED many things but till now I didn't find the mistake.
> > > >>> Is there any other way to verify or test???
> > > >>>
> > > >>> Plz any help
> > > >>> Thanks
> > > >>> ----------------------------------------
> > > >>>> Date: Tue, 10 Jun 2008 17:04:44 +0200
> > > >>>> From: dpark1978@xxxxxxxxx
> > > >>>> To: hipl-users@xxxxxxxxxxxxx
> > > >>>> Subject: [hipl-users] Re: HIPL+ ubuntu
> > > >>>>
> > > >>>> Hi,
> > > >>>>
> > > >>>> Your current peer address is not HIT, but just an IPv6 address.
> > It means
> > > >>>> your HIT configurations in /etc/hip/hosts and /etc/hosts are
> > somehow not
> > > >>>> correct.
> > > >>>>
> > > >>>> Try to make sure again that HIT values are matching with each
> > other, on
> > > >>>> both hosts.
> > > >>>>
> > > >>>> By the way, note also that the HIP protocol number is 253 for
> > the hipl
> > > >>>> release 1.0.3, in contrast to 139 for the development branches
> > explained
> > > >>>> on the manual. Therefore you have to run tcpdump like that:
> > > >>>>
> > > >>>> $ tcpdump -n -v esp or proto 253 or port 50500
> > > >>>>
> > > >>>> Dongsu
> > > >>>>
> > > >>>> Lina wrote:
> > > >>>>> Now I get this:
> > > >>>>>
> > > >>>>> test/conntest-server tcp 1120debug(debug.c:671@hip_print_hit):
> > local addr:
> > 0000:0000:0000:0000:0000:0000:0000:0000debug(debug.c:671@hip_print_hit):
> > peer addr: 3ffe:0000:0000:0000:0000:0000:0000:0002Client sends:
> > ;TESTClient has been replied.
> > > >>>>>
> > > >>>>> and
> > > >>>>>
> > > >>>>> debug(debug.c:671@hip_print_hit): Addr given to connect:
> > 3ffe:0000:0000:0000:0000:0000:0000:0003info(conntest.c:389@main_client_gai):
> >
> > !!!! conntest.c Connecting...After call conntest.c: connect to
> > 3ffe::3connect ret=0 errno=0connect took 6.010 secconnect took 6.010
> > sec=== connection test result: OK ===
> > > >>>>>
> > > >>>>> and
> > > >>>>>
> > > >>>>> debug(debug.c:671@hip_print_hit): Addr given to connect:
> > 3ffe:0000:0000:0000:0000:0000:0000:0003
> > > >>>>> info(conntest.c:389@main_client_gai): !!!! conntest.c
> > Connecting...
> > > >>>>> After call conntest.c: connect to 3ffe::3
> > > >>>>> connect ret=0 errno=0
> > > >>>>> connect took 6.010 sec
> > > >>>>> connect took 6.010 sec
> > > >>>>> === connection test result: OK ===
> > > >>>>> [16:43:26] … debug(builder.c:902@hip_dump_msg):
> > --------------- MSG START ------------------
> > > >>>>> debug(builder.c:906@hip_dump_msg): Msg type : HIP_I1 (1)
> > > >>>>> debug(builder.c:907@hip_dump_msg): Msg length: 40
> > > >>>>> debug(builder.c:908@hip_dump_msg): Msg err: 0
> > > >>>>> debug(builder.c:909@hip_dump_msg): Msg controls: 0x0000
> > > >>>>> debug(builder.c:929@hip_dump_msg): ---------------- MSG END
> > --------------------
> > > >>>>> debug(output.c:791@hip_send_raw): Using IPv6 raw socket
> > > >>>>> debug(output.c:797@hip_send_raw): local address given
> > > >>>>> debug(debug.c:671@hip_print_hit): src6:
> > 3ffe:0000:0000:0000:0000:0000:0000:0002
> > > >>>>> debug(debug.c:671@hip_print_hit): dst6:
> > 3ffe:0000:0000:0000:0000:0000:0000:0003
> > > >>>>> debug(builder.c:1654@hip_checksum_packet): Checksumming 40
> > bytes of data.
> > > >>>>> debug(output.c:884@hip_send_raw): sent=40/40 ipv4=0
> > > >>>>> debug(output.c:885@hip_send_raw): Packet sent ok
> > > >>>>> debug(output.c:106@hip_send_i1): err after sending: 0.
> > > >>>>> debug(user.c:551@hip_handle_user_msg): No response sent
> > > >>>>> debug(oppdb.c:489@hip_handle_opp_fallback): Timeout for opp
> > entry, falling back to
> > > >>>>> debug(oppdb.c:491@hip_handle_opp_fallback): Unblock returned 0
> > > >>>>> debug(debug.c:671@hip_print_hit): HIT1:
> > 2001:0017:bd5f:79e5:3807:46a3:0000:0000
> > > >>>>> debug(debug.c:671@hip_print_hit): HIT2:
> > 2001:001b:0c44:8784:2d1b:96b2:b6c5:ad41
> > > >>>>> debug(hadb.c:74@hip_hadb_rem_state_hit):
> > > >>>>> debug(debug.c:671@hip_print_hit): our HIT:
> > 2001:001b:0c44:8784:2d1b:96b2:b6c5:ad41
> > > >>>>> debug(debug.c:671@hip_print_hit): peer HIT:
> > 2001:0017:bd5f:79e5:3807:46a3:0000:0000
> > > >>>>> debug(hadb.c:2439@hip_hadb_delete_state): ha=0x0x80bbb88
> > > >>>>> debug(hadb.c:2353@hip_hadb_delete_inbound_spi): SPI=0x0
> > > >>>>> debug(hadb.c:2400@hip_hadb_delete_outbound_spi):
> > entry=0x0x80bbb88 SPI=0x0
> > > >>>>> debug(oppdb.c:45@hip_oppdb_entry_clean_up): Del peer info
> > returned 617
> > > >>>>> error(maintenance.c:98@hip_scan_opp_fallback): for_each_ha err.
> > > >>>>>
> > > >>>>>
> > > >>>>> But I want to see the HIP BE packets, and the tcpdump shows
> > nothing.
> > > >>>>>
> > > >>>>> What should I do??
> > > >>>>>
> > > >>>>>
> > > >>>>> From: linalinaa@xxxxxxxxxx
> > > >>>>> To: hipl-users@xxxxxxxxxxxxx
> > > >>>>> Subject: [hipl-users] Re: HIPL+ ubuntu
> > > >>>>> Date: Tue, 10 Jun 2008 14:13:24 +0200
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>> Thank you Dongsu sooo much.
> > > >>>>> I installed HIPl on ubuntu and now have my 2 hosts one fedora
> > and one ubuntu
> > > >>>>> I try the connection, i get this:
> > > >>>>> info(builder.c:926@hip_dump_msg):
> > Contents:0x0000000100020005info(builder.c:927@hip_dump_msg):
> > Padding:0x00000000debug(builder.c:925@hip_dump_msg): Parameter
> > type:HIP_PARAM_HOST_ID (705). Total length: 160 (4 type+length, 153
> > content, 3 padding).info(builder.c:926@hip_dump_msg):
> > Contents:0x0088100d0202ff0503010001b913040ef9e48d85182e13d49bef65ec53fb19bb0a9ba3886093f1fcc8ee6ca688c5515485fed9b601c566770707003e1b383ab8f7b9d9c085031eb3fd80200d9642ec538475458d96f328a276b3f993d80f98b6defa6ca7cd51b929d37d6c9ed46254da3d45a2308469c9a3289552b3f8976f636a8055100c46ed73286f3ba16e61686c612d6c6170746f7000info(builder.c:927@hip_dump_msg):
> >
> > Padding:0x000000debug(builder.c:925@hip_dump_msg): Parameter
> > type:HIP_PARAM_HIP_SIGNATURE2 (61633). Total length: 136 (4
> > type+length, 129 content, 3 padding).info(builder.c:926@hip_dump_msg):
> > Contents:0x0526504fd9ebee8cf2bc82a694140b971599181a25d831333c90b4413b7be1ad2452e1ea72e6a9b9ffb7955abd11e86c4846c20c5ad175fdf324227fc48f1e75e9eced6fbe569d55840d4cf9e8
> > > >>>>
> > cc654facda8c7cbdb2cc0da6d3250afe5e4ac481279c6bf769e3c703332138c1e16f70b0cbea0e272f84def22326b0d89a59856dinfo(builder.c:927@hip_dump_msg):
> >
> > Padding:0x000000debug(builder.c:929@hip_dump_msg): ----------------
> > MSG END --------------------debug(output.c:791@hip_send_raw): Using
> > IPv6 raw socketdebug(output.c:797@hip_send_raw): local address
> > givendebug(debug.c:671@hip_print_hit): src6:
> > 3ffe:0000:0000:0000:0000:0000:0000:0003debug(debug.c:671@hip_print_hit):
> > dst6:
> > 3ffe:0000:0000:0000:0000:0000:0000:0001debug(builder.c:1654@hip_checksum_packet):
> >
> > Checksumming 640 bytes of data.debug(output.c:884@hip_send_raw):
> > sent=640/640 ipv4=0debug(output.c:885@hip_send_raw): Packet sent
> > okdebug(input.c:572@hip_receive_control_packet): Done with control
> > packet, err is 0.
> > > >>>>>
> > > >>>>> and
> > > >>>>>
> > > >>>>> debug(debug.c:671@hip_print_hit): HIT1:
> > 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit):
> > HIT2:
> > 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire):
> >
> > I1 was already sent, ignoringdebug(hipd.c:646@hipd_main): netlink
> > receivedebug(nlink.c:56@hip_netlink_receive): Received a netlink
> > messagedebug(netdev.c:818@hip_netdev_event): handling msg type 23
> > ifindex=0debug(netdev.c:645@hip_netdev_handle_acquire): Acquire:
> > sending I1 (pid: 0) debug(debug.c:671@hip_print_hit): src HIT:
> > 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit):
> > dst HIT:
> > 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(hidb.c:97@hip_get_hostid_entry_by_lhi_and_algo):
> >
> > ALGO VALUE :-1, algo value of id entry
> > :3debug(debug.c:671@hip_print_hit): HIT1:
> > 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit):
> > HIT2:
> > 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire):
> >
> > I1 was already sent, ignoringdebug(h
> > > >>>> ipd.c:646@hipd_main): netlink
> > receivedebug(nlink.c:56@hip_netlink_receive): Received a netlink
> > messagedebug(netdev.c:818@hip_netdev_event): handling msg type 23
> > ifindex=0debug(netdev.c:645@hip_netdev_handle_acquire): Acquire:
> > sending I1 (pid: 0) debug(debug.c:671@hip_print_hit): src HIT:
> > 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit):
> > dst HIT:
> > 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(hidb.c:97@hip_get_hostid_entry_by_lhi_and_algo):
> >
> > ALGO VALUE :-1, algo value of id entry
> > :3debug(debug.c:671@hip_print_hit): HIT1:
> > 2001:001d:9d87:6693:4825:0dd7:058d:1e24debug(debug.c:671@hip_print_hit):
> > HIT2:
> > 2001:001e:34ac:46e3:73c4:c9de:657c:1001debug(netdev.c:749@hip_netdev_handle_acquire):
> >
> > I1 was already sent, ignoring
> > > >>>>>
> > > >>>>> It seems there's another problem and the tcpdump show no packets
> > > >>>>> Any help??
> > > >>>>>
> > > >>>>>> Date: Tue, 10 Jun 2008 12:13:39 +0200
> > > >>>>>> From: dpark1978@xxxxxxxxx
> > > >>>>>> To: hipl-users@xxxxxxxxxxxxx
> > > >>>>>> Subject: [hipl-users] Re: HIPL+ ubuntu
> > > >>>>>>
> > > >>>>>> Hi,
> > > >>>>>>
> > > >>>>>> so you mean, you added the 3 lines at the end of
> > stdio-lock.h. That's a
> > > >>>>>> wrong way, which changes nothing.
> > > >>>>>>
> > > >>>>>> Do like this:
> > > >>>>>> First, go to the 24th line in /usr/include/bits/stdio-lock.h,
> > where
> > > >>>>>> "#include " is located.
> > > >>>>>> Second, disable the include line, either by commenting it out
> > or by
> > > >>>>>> embracing with "#if 0" and "#endif". You could just remove
> > the line, too.
> > > >>>>>> Third, try compiling hipl again.
> > > >>>>>>
> > > >>>>>> Dongsu
> > > >>>>>>
> > > >>>>>> Lina wrote:
> > > >>>>>>> Hi all,
> > > >>>>>>>
> > > >>>>>>> I try to install HIPL under ubuntu 7.4
> > > >>>>>>> I used those links
> > > >>>>>>>
> > > >>>>>>> http://hipl.hiit.fi/hipl/release/latest/deb/i386/
> > > >>>>>>>
> > http://hipl.hiit.fi/hipl/release/latest/deb/i386/hipl-1.0-3-deb-src/
> > > >>>>>>>
> > > >>>>>>> And when i type ./configure&& make install
> > > >>>>>>>
> > > >>>>>>> I get this:
> > > >>>>>>>
> > > >>>>>>> In file included from /usr/include/libio.h:171, from
> > /usr/include/stdio.h:72, from /usr/include/resolv.h:64, from
> > getaddrinfo.c:53:/usr/include/bits/stdio-lock.h:24:26: error:
> > lowlevellock.h: No such file or directorygetaddrinfo.c: In function
> > 'gethosts_hit':getaddrinfo.c:484: warning: assignment from
> > incompatible pointer typegetaddrinfo.c:496: warning: passing argument
> > 2 of 'opendht_get_key' discards qualifiers from pointer target
> > typemake[2]: *** [getaddrinfo.lo] Error 1
> > > >>>>>>>
> > > >>>>>>> I found a topic in the list speaking about that, i added
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> #if 0
> > > >>>>>>> #include
> > > >>>>>>> #endif in /usr/include/bits/stdio-lock.h
> > > >>>>>>>
> > > >>>>>>> like that:
> > > >>>>>>> ....
> > > >>>>>>> # define _IO_release_lock(_fp) ; } while (0)
> > > >>>>>>>
> > > >>>>>>> #endif
> > > >>>>>>> #if 0
> > > >>>>>>> #include
> > > >>>>>>> #endif
> > > >>>>>>> #endif /* bits/stdio-lock.h */
> > > >>>>>>>
> > > >>>>>>> But I still have the same problem.
> > > >>>>>>> Do any one have any idea???
> > > >>>>>>> Thanks in advance.
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > _________________________________________________________________
> > > >>>>>>> Faites vous de nouveaux amis grâce à l'annuaire des profils
> > Messenger !
> > > >>>>>>>
> > http://home.services.spaces.live.com/search/?page=searchresults&ss=true&FormId=AdvPeopleSearch&form=SPXFRM&tp=3&sc=2&pg=0&Search.DisplayName=Nom+public&search.gender=&search.age=&Search.FirstName=Pr%C3%A9nom&Search.LastName=Nom&search.location=Lieu&search.occupation=Profession&search.interests=amis&submit=Rechercher
> > > >>>>>>
> > > >>>>>
> > > >>>>> Discutez gratuitement avec vos amis en vidéo ! Téléchargez
> > Messenger, c'est gratuit !
> > > >>>>>
> > > >>>>> _________________________________________________________________
> > > >>>>> Caroline vient de mettre à jour son profil Messenger !
> > Connectez-vous !
> > > >>>>>
> > http://login.live.com/login.srf?wa=wsignin1.0&rpsnv=10&ct=1198837564&rver=4.0.1534.0&wp=MBI&wreply=http:%2F%2Fhome.services.spaces.live.com%2F&lc=1036&id=73625
> > > >>>>
> > > >>>>
> > > >>>
> > > >>> _________________________________________________________________
> > > >>> Caroline vient de mettre à jour son profil Messenger !
> > Connectez-vous !
> > > >>>
> > http://login.live.com/login.srf?wa=wsignin1.0&rpsnv=10&ct=1198837564&rver=4.0.1534.0&wp=MBI&wreply=http:%2F%2Fhome.services.spaces.live.com%2F&lc=1036&id=73625
> > > >>>
> > > >>
> > > >>
> > > >>
> > > >> --
> > > >> Best regards,
> > > >> Andrey Lukyanenko.
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > Best regards,
> > > > Andrey Lukyanenko.
> > >
> > > _________________________________________________________________
> > > Avec Hotmail, vos e-mails vous suivent partout ! Mettez Hotmail sur
> > votre mobile !
> > > http://www.messengersurvotremobile.com/?d=hotmail
> >
> > ------------------------------------------------------------------------
> > Tous vos amis discutent sur Messenger, et vous ? Téléchargez
> > Messenger, c'est gratuit ! <http://www.windowslive.fr/messenger/>
>
>
> --
> Andrey Khurri
> Researcher
> Helsinki Institute for Information Technology (HIIT)
> Tel +358 50 384 1510
> firstname.lastname(a)hiit.fi
>
>
_________________________________________________________________
Votre contact a choisi Hotmail, l'e-mail ultra sécurisé. Créez un compte
gratuitement !
http://www.windowslive.fr/hotmail/default.asp
Other related posts: