On 28/03/2008, Axel Dörfler <axeld@xxxxxxxxxxxxxxxx> wrote: > "Urias McCullough" <umccullough@xxxxxxxxx> wrote: > > > On 27/03/2008, Axel Dörfler <axeld@xxxxxxxxxxxxxxxx> wrote: > > > I've changed the EDID mode setup a bit in r24609, maybe this > > > helps, > > > Urias? What resolution was chosen before, and what resolution is > > > chosen > > > now? > > Well, it didn't produce a noticeable difference on this desktop with > > the CRT. I grabbed a serial log, but I'm not sure I see where in the > > log it spits out the relevant info. Do I need to enable TRACE_VIDEO > > first? > > > Is it a real serial log or a syslog capture? > For the EDID info to appear, you don't need to enable TRACE_VIDEO - > there should be some lines starting with "EDID:", and if getting EDID > information succeeded, it would dump it there, then. It's a real serial log - TRACE_VIDEO seems to spit out some extra detail before the first EDID entry, so I enabled it anyway. My findings are listed here: http://dev.haiku-os.org/ticket/1975 Thanks for looking into this! :) - Urias