[gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH RECEIVER
- From: Chris G <chrisg@xxxxxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Mon, 27 Mar 2006 17:22:42 -0500
hi,
keysoft 7 does not require a reset with the mPower.
On Mon, 27 Mar 2006 16:40:23 -0500
Alex Parks <mehgcap@xxxxxxx> wrote:
AP> Hi,
AP>
AP> Thanks. I read in the Bluetooth document that a reset was
AP> needed, and never questioned it. I just tried it with no reset,
AP> and it worked perfectly. This will save hastle.
AP>
AP> Thanks again,
AP> Alex
AP>
AP> > ----- Original Message -----
AP> >From: "Robert Stigile" <rstigile@xxxxxxxxxxxxx
AP> >To: <gps-talkusers@xxxxxxxxxxxxx
AP> >Date: Mon, 27 Mar 2006 13:24:34 -0800
AP> >Subject: [gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH
AP> RECEIVER
AP>
AP> >Hello, if you have a mpower and you are using the blue logger,
AP> you do not
AP> >need to do a reset after pairing.
AP> >All you need to do is the following:
AP> >1. turn on the blue logger reciever
AP> >2. turn on the braillenote
AP> >3. Go to options, then c for connectivity, then b for bluetooth
AP> >4. if your braillenote says bluetooth is on then just press
AP> space bar if it
AP> >is not on press y for yes to turn it on
AP> >5. It will ask you if you want to serach for devices say no
AP> >6. if you need to pair it will then ask you to pair say yes
AP> >7. it will then ask for authencity code enter 0000 and press
AP> enter
AP> >8. once it says paired with bluetooth and activesync is active
AP> go back to
AP> >main menu
AP> >9. Now press n for navigation and you will be brought into the
AP> gps menu and
AP> >you should be good to go.
AP> >regards,
AP> >Robert
AP> >----- Original Message -----
AP> >From: "Alex Parks" <mehgcap@xxxxxxx
AP> >To: <gps-talkusers@xxxxxxxxxxxxx
AP> >Sent: Monday, March 27, 2006 1:06 PM
AP> >Subject: [gps-talkusers] Re: EMPOWER CANNOT FIND BLUETOOTH
AP> RECEIVER
AP>
AP>
AP> >> Hi,
AP>
AP> >> I have a Blue Logger receiver and an mPower. First, make sure
AP> >> you have:
AP> >> 1. Turned on both the receiver and Bluetooth.
AP> >> 2. Searched for, found, paired with, and activated ActiveSync
AP> >> (authentication code 0000) with the receiver.
AP> >> 3. Done a reset after ActiveSync is active.
AP> >> 4. Reactivated the receiver after the reset.
AP>
AP> >> If all that is done, and problems still persist, try exiting the
AP> >> GPS application and doing a simple reset, after turning off the
AP> >> receiver. Repeat the steps above. If nothing works, I don't
AP> >> know what to say. Sometimes the printer service of the receiver
AP> >> keeps getting activated instead of the ActiveSync, so ensure
AP> that
AP> >> is not happening.
AP>
AP> >> Good luck, and sorry I couldn't help more.
AP> >> Alex
AP>
AP> >>> ----- Original Message -----
AP> >>>From: "kath lueders" <kageylucy@xxxxxxxxxxxxx
AP> >>>To: <gps-talkusers@xxxxxxxxxxxxx
AP> >>>Date: Mon, 27 Mar 2006 09:18:54 -0600
AP> >>>Subject: [gps-talkusers] EMPOWER CANNOT FIND BLUETOOTH RECEIVER
AP>
AP> >>> Hello Everyone,
AP>
AP> >>>I am trying to help my GPS Bluetooth receiver find my Empower. I
AP> >>>probably ought to reverse that statement! Anyway, Empower keeps
AP> >>>telling me to switch to virtual mode because the receiver is not
AP> >>>detected.
AP> >>>What am I doing wrong?
AP> >>>Thank you for your help.
AP>
AP> >>>Nina, Austin, and
AP> >>>Kathleen Goetsch Lueders
AP> >>>kageylucy@xxxxxxxxxxxxx
AP>
AP>
AP>
AP>
AP>
AP>
AP>
AP>
AP>
AP>
AP>
--
Chris G <chrisg@xxxxxxxxxxxxxxxx>
Why did the chicken cross the road? To get to the other side :):).
Other related posts:
