[goodfeel] Re: rests and pickup measures in Lime Notation Editor
- From: "Duke" <douk.fattah@xxxxxxxxx>
- To: <goodfeel@xxxxxxxxxxxxx>
- Date: Tue, 29 Apr 2008 21:15:29 -0000
Ok, I was just wondering.
Douk
----- Original Message -----
From: Anne-Sophie DOUDARD
To: goodfeel@xxxxxxxxxxxxx
Sent: Tuesday, April 29, 2008 6:43 PM
Subject: [goodfeel] Re: rests and pickup measures in Lime Notation Editor
Hi Douk
I think no.
----- Message d'origine -----
De : Duke
À : goodfeel@xxxxxxxxxxxxx
Envoyé : mardi 29 avril 2008 14:50
Objet : [goodfeel] Re: rests and pickup measures in Lime Notation Editor
Wouldn't your suggestion show the time marking on the print page?
Douk
----- Original Message -----
From: Anne-Sophie DOUDARD
To: goodfeel@xxxxxxxxxxxxx
Sent: Monday, April 28, 2008 9:22 PM
Subject: [goodfeel] Re: rests and pickup measures in Lime Notation Editor
Oh! Sorry, yes, It's ctrl-i
----- Message d'origine -----
De : Dancing Dots
À : goodfeel@xxxxxxxxxxxxx
Envoyé : lundi 28 avril 2008 22:48
Objet : [goodfeel] Re: rests and pickup measures in Lime Notation Editor
That's a good suggestion, Anne-Sophie, but didn't you mean CONTROL+I
and not CONTROL+D?
Regards,
Bill
Bill McCann
Founder and President of Dancing Dots since 1992
www.DancingDots.com
Tel: [001] 610-783-6692
------------------------------------------------------------------------
From: goodfeel-bounce@xxxxxxxxxxxxx
[mailto:goodfeel-bounce@xxxxxxxxxxxxx] On Behalf Of Anne-Sophie DOUDARD
Sent: Monday, April 28, 2008 4:30 PM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: rests and pickup measures in Lime Notation
Editor
Hi Debra and Bill
To creat a pick-up measure, you can also add a mesure with ctrl-D and
change the numerator of this measure. I explain: in a 4/4 piece, you can add a
1/4 measure to have an anacrusis. Lime will give you an option to place this
measure where you want in the piece.
Bonne journée.
----- Message d'origine -----
De : albertm13@xxxxxxxx
À : goodfeel@xxxxxxxxxxxxx
Envoyé : lundi 28 avril 2008 18:33
Objet : [goodfeel] Re: rests and pickup measures in Lime Notation
Editor
The mouse operations that do the same things that Bill described are
preceeded with $$$.
Albert
-- "Dancing Dots" <billlist1@xxxxxxxxxxx> wrote:
Hi, Debra,
As you know, our GOODFEEL Braille Music Translator ships with a
licensed
copy of both the SharpEye Music Reader music OCR software and the Lime
notation editor. Our Lime Aloud scripts are also installed for those
customers who use the JAWS for Windows screen reader. Lime Aloud
gives
verbal and musical cues while the JAWS user scrolls through the
score. The
print notation is displayed on screen while the equivalent braille
music
notation can be displayed on a braille display. Print and braille
notation
scrolls in sync so that sighted and blind users know the precise note
in the
score which is highlighted and can communicate with each other about
the
music even though they may not understand how to read notation in both
mediums. See http://www.dancingdots.com/prodesc/limealoud.htm for
details.
In the instructions below, I have tried to give equivalents for
sighted
users but since I use JAWS myself, I know the keyboard-based commands
much
better. I'd appreciate it if a sighted subscriber would describe how
he or
she selects rhythmic values in Lime using the mouse.
To enter rests:
Voice | Note Entry or CONTROL+N to toggle Notation Entry Mode on
$$$ double-click the note or rest where you want to start adding
notes and single-click a note or rest to leave note entry mode. The Lime
manual refers to these two modes as the 'Note Entry Cursor' and the 'Edit
Cursor'.
Set rhythmic value with numbers 1-6 on Numbers Row
$$$ single-click the rhythm in the Piano window.
Type the letter R to enter a rest equal to the rhythmic value you
have set.
$$$ Single-click the rest on the right side of the piano window.
See the heading "Notes (Adding and Editing)" in the Lime Aloud Guide.
Shortcut to this document: Start Menu | Programs | Lime | Lime Aloud
Guide.
Setting Pick-up Measures
If the first measure of a piece has fewer beats than established by
the time
signature of the piece, that bar is called a pick-up or anacrusis. To
number the pick-up measure as 0:
Move to the first note of the pick-up measure in the top staff of the
piece.
Edit | Options or ALT+E, O.
set "Start bar numbers at" to 0
See Page 38 of the MS Word version of the GOODFEEL manual for more on
bar
numbering rules. Shortcut to this document: Start Menu | Programs |
GOODFEEL | GOODFEEL Manual in MS Word. You can also find this
information
by selecting Help from GOODFEEL's menu, click on the Index tab, type
in
"pickup" and click Display.
I have copied this reply to our GOODFEEL list. If you're not
subscribed and
would like to be, just let me know. In general, our ddots-l list
focuses on
audio production and related topics. However, a number of customers
subscribe to both the GOODFEEL and the ddots-l lists.
Regards,
Bill
Bill McCann
Founder and President of Dancing Dots since 1992
www.DancingDots.com
Tel: [001] 610-783-6692
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Debra Hernstrom
Sent: Saturday, April 19, 2008 3:21 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] rests and pickup measures
Hello,
I need to know how to create rests and pick up measures with Lime
Aloud.
Pardon all spellings. thanks.
Debra Hernstrom
_____________________________________________________________
Bolster your sales numbers with professional sales training. Click
here!
Other related posts:
