[fruityloops] Re: Mixing in Fruity Loops

  • From: "simon.heath" <simon.heath@xxxxxxxxxxxxxxxxxx>
  • To: <fruityloops@xxxxxxxxxxxxx>
  • Date: Thu, 05 Dec 2002 11:51:00 +0000

Hi, I put a post recently on CM forum about the fact that I have never
received a reg code from fruityloops or don't think I have. I've gone
through the procedure twice now to request a new one and nothing's happened.
Has anyone else had this problem? I'm really worried about it because I want
my free updates and access to news etc - I purchased it online and
downloaded it fine. Just wondered if you'd heard of this.


> From: Andrew Ebling <andyebling@xxxxxxxxxxx>
> Reply-To: fruityloops@xxxxxxxxxxxxx
> Date: 05 Dec 2002 11:57:11 +0000
> To: fruityloops@xxxxxxxxxxxxx
> Subject: [fruityloops] Re: Mixing in Fruity Loops
> On Thu, 2002-12-05 at 11:29, Rui.Barata@xxxxxxxxxxxxxxxxxxxx wrote:
>> It helped me a lot. Just one more question: the knobs in the step
>> sequencer. What position shall they be at the beginning of the mixing?
>> I think one of them is Pan. Well, this one must be in the middle (if no
>> panning effects are required). The other one is Volume. This one, do you
>> recommend it to be in the middle position also?
> I recommend you reset these controls (right click and select reset).
> However, you might want to adjust the channel vol in Channel Settings (I
> think its under the Misc page, but I'm going from memory here), to give
> a good level of output (so the meter in the FX window shows a good
> level).
>> About the procedure that you've recommended (adding FX plug-ins, FX slots
>> and all related) its all described in Fruity  Effects chapter of the
>> manual?
> I recommend you go to the fruityloops website, click on "support-help"
> button on the left hand side and select "tutorials".  Scroll to the
> bottom of the page and there is a tutorial called "FX Explained".  I
> think this covers basic FX usage fairly well.
> Its also explained in the online help file, but the tutorial on the
> website is probably easier to follow.
> Andy
> -- 

Other related posts: