Re: [foxboro] aim*API issues.
- From: "Schouten, Frits JF" <Frits.Schouten@xxxxxxxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 4 Sep 2012 08:20:06 +1200
Thank you for your quick reply, Russ.
But that's what I effectively do via the 'control Panel' without creating
multiple apimgr's
Solution 1782 is a work around and not a good solution.
This way we end up with numerous apimgr.exe running because they don't quit
when the Remote Desktop is closed!
Cheers,
Frits.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Tuesday, 4 September 2012 7:48 a.m.
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] aim*API issues.
From Solution 1782 on GCS website
Problem Description
Can not run the apitst utility when remotely logged into a P90. Is there a way
around this?
Fix/Resolution
To run apitst remotely:
1. From the Remote Display Manager, open a command prompt.
2. Change to shell (d: ? sh)
3. Change to the /opt/aim/bin directory.
4. Start another instance of the apimgr process, type: startp /b apimgr 5. You
can use apitst from the Remote Display Manager.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Schouten, Frits JF
Sent: Monday, September 03, 2012 3:21 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] aim*API issues.
Dear list,
Is it worth putting a CAR in for the fact the aim* applications don't work from
a Remote Desktop connection?
Running apitst or apispy both come back with the following message:
D:\opt\aim\bin>apispy
SimSci AIM*API Test Program
AIM*API is not running!
Please restart application after AIM*API is started!
But it is running and when I run the same 'test' programs from the console,
it's fine.
So, I went to 'Control Panel' and restarted AIM*API from the Remote Desktop
Connection and all started to work just fine.
I can imagine that all programs using AIM*API are temporary 'disconnected' when
a restart is done. This can't be right.
Why can't it be like a normal operating system where once a service is started,
it's available to any application from any terminal?
The above issue is hindering the development of user applications using Remote
Desktop Connection.
Regards,
Frits Schouten
Principal Engineer
Process Computing Department
Aukland: +64 +9 375 8111 ext 5261
Waiuku: +64 +9 236 5911 ext 5261
Mobile: 021 963894
Email:
Frits.Schouten@xxxxxxxxxxxxxxxxxx<mailto:Frits.Schouten@xxxxxxxxxxxxxxxxxx>
________________________________
NOTICE - This message and any attached files may contain information that is
confidential, legally privileged or proprietary. It is intended only for use by
the intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error. Any dissemination, copying, use
or re-transmission of this message or attachment, or the disclosure of any
information therein, is strictly forbidden. BlueScope Steel Limited does not
represent or guarantee that this message or attachment is free of errors, virus
or interference.
If you have received this message in error please notify the sender immediately
and delete the message. Any views expressed in this email are not necessarily
the views of BlueScope Steel Limited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
NOTICE - This message and any attached files may contain information that is
confidential, legally privileged or proprietary. It is intended only for use by
the intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error. Any dissemination, copying, use
or re-transmission of this message or attachment, or the disclosure of any
information therein, is strictly forbidden. BlueScope Steel Limited does not
represent or guarantee that this message or attachment is free of errors, virus
or interference.
If you have received this message in error please notify the sender immediately
and delete the message. Any views expressed in this email are not necessarily
the views of BlueScope Steel Limited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
