Re: [foxboro] aim*API issues.
- From: Christopher Miller <gooooomaker@xxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 3 Sep 2012 16:47:08 -0400
I've encountered a similar issue when restarting the historian from a remote
desktop. The service ends when my RDC connection is ended. This caused us a
deviation to report on our titleV permit. I do everything with AIM* from the
console, except retrieving data.
Chris
Sent from my iPhone
On Sep 3, 2012, at 3:21 PM, "Schouten, Frits JF"
<Frits.Schouten@xxxxxxxxxxxxxxxxxx> wrote:
> Dear list,
> Is it worth putting a CAR in for the fact the aim* applications don't work
> from a Remote Desktop connection?
> Running apitst or apispy both come back with the following message:
> D:\opt\aim\bin>apispy
>
> SimSci AIM*API Test Program
> AIM*API is not running!
> Please restart application after AIM*API is started!
>
> But it is running and when I run the same 'test' programs from the console,
> it's fine.
>
> So, I went to 'Control Panel' and restarted AIM*API from the Remote Desktop
> Connection and all started to work just fine.
> I can imagine that all programs using AIM*API are temporary 'disconnected'
> when a restart is done. This can't be right.
>
> Why can't it be like a normal operating system where once a service is
> started, it's available to any application from any terminal?
>
> The above issue is hindering the development of user applications using
> Remote Desktop Connection.
>
> Regards,
> Frits Schouten
> Principal Engineer
> Process Computing Department
> Aukland: +64 +9 375 8111 ext 5261
> Waiuku: +64 +9 236 5911 ext 5261
> Mobile: 021 963894
> Email:
> Frits.Schouten@xxxxxxxxxxxxxxxxxx<mailto:Frits.Schouten@xxxxxxxxxxxxxxxxxx>
>
>
> ________________________________
>
>
> NOTICE - This message and any attached files may contain information that is
> confidential, legally privileged or proprietary. It is intended only for use
> by the intended recipient. If you are not the intended recipient or the
> person responsible for delivering the message to the intended recipient, be
> advised that you have received this message in error. Any dissemination,
> copying, use or re-transmission of this message or attachment, or the
> disclosure of any information therein, is strictly forbidden. BlueScope Steel
> Limited does not represent or guarantee that this message or attachment is
> free of errors, virus or interference.
>
> If you have received this message in error please notify the sender
> immediately and delete the message. Any views expressed in this email are not
> necessarily the views of BlueScope Steel Limited.
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
