For YOUR BMS I think A HDS System would be appropriate....... :) -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of duc.do@xxxxxxxxxxxxxx Sent: Wednesday, March 22, 2006 11:15 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Safety systems Hi list, A question came up about what people commonly use for their safety systems such as BMS (burner management system) on boilers and other critical and perhaps dangerous things. For those of you who use such things, do you use PLC-type equipment or more robust stuff like Triconex or August systems? Since this is a fairly generic question that probably engender generic answers, please send your answers directly to me, off-list. Thank you! Duc --=3D20 DCS Group, Carrollton Plant Dow Corning Corporation Carrollton, KY, US =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave