I hit send to quickly: Before you do that, would you: 1) Break the problem link or links 2) Checkpoint 3) Restore the problem link or links 4) Checkpoint The checkpoint command among other things reconnects OM p2p. The procedure above is likely going to solve the problem without requiring a station reboot. Checkpointing the source CP should not be necessary, but it shouldn't hurt either. :) Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx -----Original Message----- From: Johnson, Alex P (IOM) Sent: Monday, August 27, 2012 11:54 AM To: 'foxboro' Subject: RE: [foxboro] Peer to Peer connection good but not updating A reboot of both stations will definitely clear the OM lists out, but you have to reboot both sides at once. Before you do that, would you: 1) Break the problem link or links 2) Checkpoint 3) Restore the problem link or links 4) Checkpoint The checkpoint command among other things reconnects OM p2p. The procedure above is likely going to solve the problem without requiring a station reboot. Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Kessler Sent: Monday, August 27, 2012 11:46 AM To: foxboro Subject: [foxboro] Peer to Peer connection good but not updating I have some peer to peer connections between calcA blocks in ZCP's that are not updating. (XXX.BO01 > YYY.BI01) I've deleted/undeleted the blocks, with no success. Deleting the source block does not turn the sink point Cyan which should normally be the case. I am able to see the status of the source using omget. I suspect corrupt OM lists. Will a re-boot clear these up or is a CP initialize/loadall required? Anyone experienced this type of problem? mk _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave