Try checkpointing both sides, especially after the delete/undelete... Joseph M. Riccardi 386-441-0250 Office 386-451-7607 Cell Joe@xxxxxxxxxxxxx "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Kessler Sent: Monday, August 27, 2012 12:46 PM To: foxboro Subject: [foxboro] Peer to Peer connection good but not updating I have some peer to peer connections between calcA blocks in ZCP's that are not updating. (XXX.BO01 > YYY.BI01) I've deleted/undeleted the blocks, with no success. Deleting the source block does not turn the sink point Cyan which should normally be the case. I am able to see the status of the source using omget. I suspect corrupt OM lists. Will a re-boot clear these up or is a CP initialize/loadall required? Anyone experienced this type of problem? mk _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave