You can skip the partitioning route if you load from tape onto the same size or larger hard drive. (At least, that's been my experience) > > From: "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx> > Date: 2005/09/12 Mon PM 02:50:52 EDT > To: <foxboro@xxxxxxxxxxxxx> > Subject: Re: [foxboro] Lifecycle AW51D/E > > Sun D/E Hardware is fairly easy to come by on the second hand market > ive been using solarsystems.com > D box failures !! heres my findings > they are more common than B > on two different occasions an intermittently panicing D box has turned ou= > t to need a new motherboard > we have also found the install script for a D Box with a 8.4 Gig drive en= > ds up with only a 75Mb root partition > which is smaller than a 4.2 Gig drive gets. on our D Box WP's we partitio= > n the drive manually assigning about 500 Mb to root and swap and 1.5Gb to= > usr, we then edit the install script to skip drive formatting > we also found that unless its a sun drive you wont beable format above 8.= > 5Gb > I wasnt brave enough to manually partition my E box AW but it needs more = > swap > > notice when the list question was posted about the pricing of going from = > V7 to V8 (minimal hardware needed) it was all quiet out there in Foxboro = > land. a 6.x system with D/E boxes needs to last till V8.UNIX > Shaun > NZ Steel > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx > [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Baptiste, Nigel > Sent: Tuesday, 13 September 2005 00:08 > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] Lifecycle AW51D/E > > > I have a WP51D that is crashing at present (problem was posted on this =3D > group) - attempts to buy a spare from Foxboro led me along the same =3D > path: replace with a G box and upgrade to version 7.0. This is an =3D > expense which would be met with some management resistance as this =3D > system is just 3 yrs old. > > I too would like to hear from the group any suggestions.=3D20 > > Regards, > NB. > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx > [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Dirk Pauwels > Sent: Monday, September 12, 2005 4:53 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Lifecycle AW51D/E > > > Are there any owners of AW51 D & E boxes out there running 6.x? > > We recently reviewed the Inv. Lifecycle report and found that the AW51 D = > =3D > & E=3D20 > boxes are no longer available from jan 2007 on. Invensys advises to =3D > change=3D20 > to G boxes and upgrade to version 7.0. > I hate to imagine what would happen if our host box (E) would fail=3D20 > (motherboard or sun Proccessor) and we can't get a replacement within a=3D= > 20 > couple of days.... > I probably can't convince management to replace and upgrade a perfectly =3D > good=3D20 > system, only because of the end of lifetime issue....So we'll probably =3D > try=3D20 > to obtain a spare E box. > I would be interested in knowing the strategies on this of the other I/A = > =3D > > users. > > Thanks & Rgds, > > Dirk Pauwels - DCS coordinator > Engineering dept. > Hexion Specialty Chemicals Belgium > E mail: dirk.pauwels@xxxxxxxxxxxxxx > > _________________________________________________________________ > Gratis bloggen op MSN Spaces http://spaces.msn.com/?mkt=3D3Dnl-be > > =3D20 > =3D20 > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > =3D20 > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: =3D > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin > to unsubscribe: =3D > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave > =3D20 > =20 > =20 > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 > > > EOM=0A=0ANOTICE - This message and any attached files may contain informa= > tion that is confidential and/or subject of legal privilege intended only= > for use by the intended recipient. If you are not the intended recipient= > or the person responsible for delivering the message to the intended rec= > ipient, be advised that you have received this message in error and that = > any dissemination, copying or use of this message or attachment is strict= > ly forbidden, as is the disclosure of the information therein. If you hav= > e received this message in error please notify the sender immediately and= > delete the message. > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave