Rakesh,
You may also refer to SOL2483, to document the problem when contacting the
Global Customer Support Center.
Regards,
Scott
________________________________________
From: Landry, Scott
Sent: Tuesday, March 29, 2016 12:22 PM
To: foxboro@xxxxxxxxxxxxx
Subject: RE: [foxboro] ICCopen error while downloading
Rakesh,
Tom makes a good suggestion, Try to use ICC on a settable non-important
parameter (something settable from Select)
ICCopen error: icConnectCp: icCpConnect problem; the error should also show
up the in smon_log.
I see several cases with this issue and it typically means you have a
locked IPC channel to that CP.
Known resolution is to reboot both CPs of a FT pair (if FT) after you have
tried rebooting the CPs host and any other IACC Client/Server
that may have access to this CP.
Of course you should consult your local Field Service Rep. and/or one of
the Global Customer Support Centers for more detailed advice before
performing a double sided reboot on the CP.
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Badura, Tom [tbadura@xxxxxxxxxx]
Sent: Tuesday, March 29, 2016 11:47 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] ICCopen error while downloading
Rakish,
Didn't think this was the same, but worth a shot. You said you can't reboot
the CP but can you, have you, rebooted the IACC server machine?
Although you are not supposed to use ICC if using IACC, can you open and try
making one small insignificant change to a block using ICC and see if you get
an error. Might tell you if it is an iccdrvr.tsk or IACC problem. May need to
change the IACC\coexistence\IACC-CP file to do this?
Tom Badura
-----Original Message-----
Subject: Re: [foxboro] ICCopen error while downloading
Hi Tom,
I cant see the CP+ in locks folder.
I get the error even while downloading standard blocks.
Rgds,
Rakesh Dash
Rakesh,
Although not the same error message, it sounds similar to the ICC already open
problem we run into at times with IACC. Check usr\fox\sp\locks and look for a
file cpname+ (plus sign on end). If there, delete it and try again.
Does this problem only exist when downloading your Modbus device ECBs and DCI
blocks or do you get the same error when downloading any standard block?
Tom Badura
Plastics Engineering Company
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of RAKESH DASH
Sent: Friday, March 25, 2016 12:01 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] ICCopen error while downloading
Anyone out there who has faced similar issue and can suggest. I m still stuck.
Rgds,
Rakesh
On Mar 11, 2016 11:20 PM, "RAKESH DASH" <rakeshinxs@xxxxxxxxx> wrote:
Hi,
I have a modbus device which I added. Added few analog points as well.
But now when I try to download the controller in IACC I am getting an
error as ICCopen error: icConnectVp : icCpConnect problem.
Can anyone help ? I cant afford to reboot the processor as Plant is
running.
Rgds,
Rakesh
