I'll third that, I've been a long term reader, but this is my first post. Why ? Because I've never needed to. If I've got a problem then someone else in the list has already been there and solved that, and if someone needs help, then by the time I can reply there are already half a dozen answers. Thankyou all for the many solutions you have provided over the years even without knowing it, and as for Foxray and a CLI, you can pry them both from my cold dead fingers. Regards, Luke Grattan Senior process control engineer MMG Century Mine Email Disclaimer: This email and any attachments may contain confidential information of MMG. It may also be legally privileged and/or the subject of copyright. If you are not an intended recipient, you may not copy, forward, disclose, save or use any part of it. If you have received this email in error, please notify the sender and delete the email and your reply from your system. Although this email has been checked for viruses and other defects, no responsibility can be accepted for any loss or damage arising from its receipt or use. MMG respects your privacy. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave