Re: [foxboro] Fiber optic conectors and wavelengths
- From: "Davis, Mike A" <mike.davis@xxxxxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Thu, 2 Mar 2006 16:36:52 -0500
P0972WT Specifications (1000BASE-SX) Optical Specifications
Item 62.5 =A5=ECm MMF 50 =A5=ECm MMF
Transmit Power (minimum) -9.5 dBm -9.5 dBm
Receive Sensitivity -17 dBm -17 dBm
Link Power Budget 7.5 dBm 7.5 dBm
Operating Range
Item Modal Bandwidth @ 850 nm Range
62.5 =A5=ECm MMF 160 MHz/km
2-
220 Meters
62.5 =A5=ECm MM F 200 MHz/km 2-275
Meters
50 =A5=ECm MMF 400 MHz/km 2-
500 Meters
50 =A5=ECm MMF 500 MHz/km 2-
550 Meters
P0972YQ Specifications (1000BASE-SX) Optical Specifications
Item 62.5/125 =A5=ECm MMF 50/125 =A5=ECm
MMF
Transmit Power (minimum) -9.5 dBm -9.5 dBm
Transmit Power (maximum) -3 dBm -3 dBm
Receive Sensitivity -20 dBm -20 dBm
Link Power Budget=A9=F6
(Multimode Only) 10.5 dBm N/A
1. The maximum drive distance (up to 2 km) depends on the quality of =
the
installed multimode fiber-optic cable segment. Use the Link Power =
Budget to
calculate the maximum cable length of the attached segment. The Link =
Power
Budget must not exceed those specified in this table. The MGBIC-LC03 =
input
power must not exceed -3 dBm. Otherwise, saturation could occur.
Operating Range
Item Modal Bandwidth @ 1310 nm Range
62.5 =A5=ECm MMF 160
MHz/km 2000 Meters
50 =A5=ECm MMF 400
MHz/km 2000 Meters
P0972WU Specifications (1000BASE-LX) Optical Specifications
Item 62.5 =A5=ECm MMF 50
=A5=ECm
MMF 10 um SMF
Transmit Power (minimum) -11.5 dBm -11.5 dBm -
9.5 dBm
Receive Sensitivity -20 dBm -20 dBm -20 dBm
Link Power Budget 8.5 dBm 8.5
dBm 10.5 dBm
Operating Range
Item Modal Bandwidth @ 1300 nm Range
62.5 =A5=ECm MMF 500 MHz/km
2-
250 Meters
50 =A5=ECm MM F 400 MHz/km 2-
550 Meters
50 =A5=ECm MMF 500 MHz/km 2-
550 Meters
10 =A5=ECm SMF N/A 2-
10,000 Meters
=20
P0972YL Specifications (1000BASE-T)
Item Specification
Supported Cable:
Type Copper, Category 5 UTP
Maximum Length Up to 100 meters
Connector RJ45
Data Rate 1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only Automatic
crossover detection
TX Output impedance 100 ohms, typical at all frequencies
between 1 MHz and 125 MHz
RX Input impedance 100 ohms, typical at all frequencies
between 1 MHz and 125 MHz
Enterasys F/O switches (Foxboro supplied) FE MTRJ 100Base-FX standard =
at
1300 NM
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx =
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Brian Bates
Sent: Thursday, March 02, 2006 4:08 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Fiber optic conectors and wavelengths
Hi Stan
We are in the process of staging our new gear, so I can tell you what I
have seen so far.
Enterasys F/O switches (Foxboro supplied) MTRJ
Cisco F/O switches (seem to work just fine) MTRJ
ATS LC
FCP270 LC
NCNI MTRJ
RCNI MTRJ
AW70 with two F/O NIC MTRJ
-Regards, Brian.
=
=20
stan =
=20
<stanb@xxxxxxxxx> =
=20
Sent by: =
To=20
foxboro-bounce@fr Foxboro List =
=20
eelists.org <foxboro@xxxxxxxxxxxxx> =
=20
=
cc=20
=
=20
03/02/2006 08:19 =
Subject=20
AM [foxboro] Fiber optic conectors =
and=20
wavelengths =
=20
=
=20
Please respond to =
=20
foxboro@freelists =
=20
.org =
=20
=
=20
=
=20
We are preparing to purchase some fiber optic test gear to use for =
basic
troubleshooting on the fibers associated with our control systems.
I'm interested in finding out what types of connectors, and what =
wavelength
light are used by various pieces of IA hardware. Anyone know where to =
find
a summary of this information?
--
U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite
Vietcong Terror
- New York Times 9/3/1967
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
