Thank you Brian, I'll have the customer try that.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx <foxboro-bounce@xxxxxxxxxxxxx> On Behalf Of
Long, Brian
Sent: Wednesday, June 15, 2022 12:18 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AW51D Boot Problem and NVRAM Suspected Failure
Security Notice: Please be aware that this email was sent by an external sender.
Printenv and setenv are used from the ok prompt, board level, Solaris. Usually
turn box on, use the STOP key and letter A at the same time to get to ok prompt.
Just do a web search for Solaris printenv and you'll find a bunch of stuff.
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx <foxboro-bounce@xxxxxxxxxxxxx> On Behalf Of
DELONG David (Framatome)
Sent: Wednesday, June 15, 2022 10:41 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AW51D Boot Problem and NVRAM Suspected Failure
Hello,
I'm supporting a customer who has a suspected NVRAM failure on their AW51D
running I/A v6.1
The engineering workstation when booted will display the Nodebus icon on the
screen, but when the customer tries to open I/A FoxView under programs nothing
happens.
I found old threads in freelist pertaining to using CTRL+C and entering the
printenv command at the OK prompt, but the customer and I are not familiar
enough with the function of the AW51Ds and their boot sequence to know when to
use these steps.
I had the customer use CTRL+C when the engineering workstation was booting
which resulted in a message that it was in single User mode and prompted him to
use CTRL+D to boot to normal mode or enter the password to enter maintenance
mode. He does not know the maintenance password and I cannot recall if it is a
default one.
At one point, he was asked to select a boot level 0-6, but we were not sure of
what those options were.
Should the CTRL+C be entered during the boot up or after the boot has completed
and he is on the main screen, but his I/A FoxView isn't up, any recommendations
on how we proceed?
On the subject of checking the printenv through a command, when and how do we
do this? He has not seen any available command prompt during boot and does not
have access to a VT100 window in I/A.
Thank you for the support.
Dave
David DeLong II
Engineer III
Framatome Inc.
Office +1 508 573-6729
Mobile +1 508 851-4402
Framatome Inc.
20 Cabot Boulevard, Suite 250
Mansfield, MA 02048
mail to: david.delong-ii@xxxxxxxxxxxxx
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at
https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.thecassandraproject.org%2Fdisclaimer.html&data=05%7C01%7Cblong%40gbp.com%7C97deb1895d054617952a08da4ee58294%7C817907a457054df1a2dfff993531c192%7C0%7C0%7C637909044902579876%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=VHdtfhTobo8lhFxco1ugSoOmBW%2B0wcYm1xM5V7i0L%2FY%3D&reserved=0
foxboro mailing list:
https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freelists.org%2Flist%2Ffoxboro&data=05%7C01%7Cblong%40gbp.com%7C97deb1895d054617952a08da4ee58294%7C817907a457054df1a2dfff993531c192%7C0%7C0%7C637909044902579876%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=FKZgCHj8dFy%2BrzFATWXKneOCDYG%2FuvWEfted%2BhwsDuA%3D&reserved=0
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
