Along those lines Duc, could Dave possibly rewrite his Calc block to use say
RI05 and then create a AIM point for it. If this works he would still have the
RI04 point to play with and hopefully recover the data.
Tom Badura
-----Original Message-----
Subject: Re: [foxboro] AIM* Collection fails after divide by 0
I assume that the historized point was working before the error, so I discount
the typo scenario.​ I think at this point you don't have much choice other
than deleting the current CALC.RI04 from the AIM historian and re-adding it.
You'll lose historized data but you may solve your problem.
Duc
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave