[foxboro] FBM200 series Modbus
- From: "Lowell, Tim:" <tlowell@xxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 7 Oct 2002 05:55:33 -0700
This is a question for all the Invensys folks:
At the Flow Island demo in Orlando, I saw a 200 series Modbus FBM. So far,
I have not seen anything on the CSC web site such as a PSS or any kind of
announcement that this new FBM is available. Is this available with v.6.4?
Or is it being held back to coincide with the 7.0 release next year? Or is
it going to be available later than that?
The timing on this piece of hardware is fairly critical for us. We'd like
to at least look at it if it will be available by early 2003. Otherwise, we
need to go ahead and start planning on using Modbus Integrator 30's or some
sort of OPC solution.
Thanks,
Tim Lowell
Control Systems Engineer
ConocoPhillips, Trainer Refinery
Phone: 610-364-8362
Fax: 610-364-8211
tlowell@xxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] FBM200 series Modbus
