[ergo] Re: Update Posted
- From: "Robert McNeil" <mcneil@xxxxxxx>
- To: <ergo@xxxxxxxxxxxxx>
- Date: Mon, 15 Apr 2002 22:14:21 -0800
Hi John,
I deleted my existing receiver files with the receiver off as detailed
below, then updated to the latest version (1.0.1.52) When I open Ergo 4 I
receive a Catastrophic Failure if I click OK then the program resumes normal
operation until I click on a frequency then I receive another Catastrophic
Failure. I checked the program update report and it looks like everything
was extracted and replaced okay. Any idea's?
Bob
Drake R8B
Windows ME
----- Original Message -----
From: "John Fallows" <john.fallows@xxxxxxx>
To: "ERGO Beta List" <ergo@xxxxxxxxxxxxx>
Sent: Monday, April 15, 2002 12:11 AM
Subject: [ergo] Update Posted
>
> Please delete your existing receiver *.CTR and *.USR files (either
manually,
> or by pressing the Reset button on the Beta page of Properties, without
any
> receiver running.
>
> Have added a "Lock On/Off" button to receivers. Normal operation with
ERGO
> is Lock On. When you select Lock Off, ERGO disables its controls, and
> updates as you tune the receiver manually.
>
> This does not apply to the RX320 as it does not have manual controls.
>
> In the case of the AR7030, the most common controls are updated over a 2
> second period, and a full refresh of all controls is done when you turn
> "Lock On".
>
> Also, completely rebuilt the receiver control reporting logic, so
everything
> works properly whether you tune the receiver from E4 or from the front
> panel.
>
> Still not happy with the AR7030 control, and will do more work on it, but
> all the basic functions that I can test seem to be working.
>
>
>
Other related posts:
