Thanks to all that responded to the question about guitar and bass players.
We have about 6 folks at this time. I want to use this information when I
contact Line 6 about the inaccesability of their Fire Hawk pedalboard FX and
amp simulator that can be controlled via Bluetooth on IPhone, IPad, and
Android devices. None of the app's buttons are labeled for voice over as I
have downloaded the app. This would be a great device for live work and
direct recording. I don't think it would take much for their developers to
make this thing work for all of us.
Check it out at:
www.sweetwater.com
and do a search for line 6 fire hawk FX.
Thanks,
Grant
-----Original Message-----
From: FreeLists Mailing List Manager [mailto:ecartis@xxxxxxxxxxxxx] ;
Sent: Sunday, May 28, 2017 1:10 AM
To: ddots-l digest users
Subject: ddots-l Digest V5 #115
ddots-l Digest Sat, 27 May 2017 Volume: 05 Issue: 115
In This Issue:
[ddots-l] Re: Help recording content from old DAT Machine in
[ddots-l] Re: Do you play guitar or bass?
[ddots-l] Re: Do you play guitar or bass?
[ddots-l] Re: Do you play guitar or bass?
[ddots-l] Re: Help recording content from old DAT Machine in
----------------------------------------------------------------------
From: Kevin Gibbs <kevjazz@xxxxxx>
Date: Sat, 27 May 2017 01:42:47 -0500
Subject: [ddots-l] Re: Help recording content from old DAT Machine into
Fact is, I had completely screwed the pooch. The control panel for the focus
right had been set to internal. Once I set it to SPDIF, and made sure that
the sample rates were in sync, everything was cool. Thanks for all the
help.
Sent from my iPhone
On May 26, 2017, at 11:47 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:are carried with the connection, so no extra cables are required. This
Kevin, SPDIF as well as ADAT and its variants use digital clocks. These
Note this has nothing to do with sonar and it's clocks, mtc clocks, orword clock, i'mreferring to SPDIF specificly.
separate master clock. With this in mind, what is the correct order? There
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on
behalf of Kevin Gibbs <kevjazz@xxxxxx>
Sent: Friday, May 26, 2017 8:04:07 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Help recording content from old DAT Machine
into Sonar 8.5
Xavier,
I have sonar, the focus right, and the DAT machine. I do not have a
Sent from my iPhoneRemember with SPDIF sometimes order is important. Since the audio source is
On May 26, 2017, at 6:27 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:
Kevin, check clock sources, and make sure the 2 units are in syncn.
rate on the DAT. I suspect that will solve the problem. Not home now. Will
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on
behalf of Kevin Gibbs <kevjazz@xxxxxx>
Sent: Friday, May 26, 2017 7:05:28 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Help recording content from old DAT Machine
into Sonar 8.5
Floyd,
Just got an email from another list recommending that I check my sample
wrote:
Sent from my iPhone
On May 26, 2017, at 5:41 PM, floyd white <cavernrecording@xxxxxxxxx>
To save space.
Hi Kevin,
I'm not familiar with your interface but do you have any way of
using analog outs from your DAT into your interface?
On 5/26/17, Kevin Gibbs <kevjazz@xxxxxx> wrote:
Dear all,
I really need help on this one. I own a DAT Machine which is
connected via SPDIF to my focus right 18i20. Yesterday, and for a
couple days before then, I was transferring The contents of old
DAT tapes into sonar without any issues.
Today, when I fired up my system to continue making these
transfers, I was on able to record anything at all. I also tried
this in Reaper. I should note that I opened and armed Reaper
first, before opening sonar, because I wanted to save my files as FLAC
PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!
When I was on able to record in reaper, I opened sonar and
discovered that I couldn't get any content there, either.
For the sake of this discussion, I will stay focused in sonar.
Here are the things I have done:
I made sure that the track I wanted was assigned to the SPDIF
input and the master output.
2. Made sure that the track was armed and that input monitoring
was enabled.
3. For the record, I had done the same things in reaper when I
tried that as well.
I know that the tapes have content because I monitored through my
headphones using the headphone jack on the DAT Machine.
I also have enough vision to see the display on the DAT Machine
and saw the VU meters registering as the content played.
While this should not have been necessary I also reached back to
make sure that my cables were properly seated. These cables are
almost brand-new in as much as they have almost never been used.
Also made sure that SPDIF what is enabled in my focus right
control panel. I don't need accessibility I have enough vision to
use a mouse when necessary.
Powered down and rebooted computer twice.
WTF?
Any help greatly appreciated from reaper or sonar or Samplitude users.
Haven't gone to Samplitude yet because I don't think the choice of
DAW has anything to do with this.
Thanks for any help,
Kevin
Sent from my iPhone
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject?q or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
I play both
Sent from my iPhone
On May 25, 2017, at 5:14 PM, Andre Jarreau
<andre.jarreau@xxxxxxxxxxxxx>
wrote:
I play Guitar. Andre
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Grant at Fly By Night
Sent: Thursday, May 25, 2017 5:45 PM
To: dancing dots list
Subject: [ddots-l] Do you play guitar or bass?
Hi everyone,
Out of curiosity, how many on this list play guitar or bass? It does
not matter how advanced you are, I am just curious to know the number.
Thanks
Grant
Virus-free. www.avast.com
I play bass.
On 27/05/2017, Edgar Cabachuela <dmarc-noreply@xxxxxxxxxxxxx> wrote:
I play both
Sent from my iPhone
On May 25, 2017, at 5:14 PM, Andre Jarreau
<andre.jarreau@xxxxxxxxxxxxx>
wrote:
I play Guitar. Andre
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Grant at Fly By Night
Sent: Thursday, May 25, 2017 5:45 PM
To: dancing dots list
Subject: [ddots-l] Do you play guitar or bass?
Hi everyone,
Out of curiosity, how many on this list play guitar or bass? It does
not matter how advanced you are, I am just curious to know the number.
Thanks
Grant
Virus-free. www.avast.com
--
Facebook: m.facebook.com/aidan.maher92
Skype: andries4451
Twitter: smarttalk7
Audioboo: www.audioboo.com/DjSpotlight
I play bass.
On 27/05/2017, Edgar Cabachuela <dmarc-noreply@xxxxxxxxxxxxx> wrote:
I play both
Sent from my iPhone
On May 25, 2017, at 5:14 PM, Andre Jarreau
<andre.jarreau@xxxxxxxxxxxxx>
wrote:
I play Guitar. Andre
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Grant at Fly By Night
Sent: Thursday, May 25, 2017 5:45 PM
To: dancing dots list
Subject: [ddots-l] Do you play guitar or bass?
Hi everyone,
Out of curiosity, how many on this list play guitar or bass? It does
not matter how advanced you are, I am just curious to know the number.
Thanks
Grant
Virus-free. www.avast.com
--
Facebook: m.facebook.com/aidan.maher92
Skype: andries4451
Twitter: smarttalk7
Audioboo: www.audioboo.com/DjSpotlight
On May 26, 2017, at 11:47 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:are carried with the connection, so no extra cables are required. This
Kevin, SPDIF as well as ADAT and its variants use digital clocks. These
Note this has nothing to do with sonar and it's clocks, mtc clocks, orword clock, i'mreferring to SPDIF specificly.
separate master clock. With this in mind, what is the correct order? There
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on
behalf of Kevin Gibbs <kevjazz@xxxxxx>
Sent: Friday, May 26, 2017 8:04:07 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Help recording content from old DAT Machine
into Sonar 8.5
Xavier,
I have sonar, the focus right, and the DAT machine. I do not have a
Sent from my iPhoneRemember with SPDIF sometimes order is important. Since the audio source is
On May 26, 2017, at 6:27 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:
Kevin, check clock sources, and make sure the 2 units are in syncn.
rate on the DAT. I suspect that will solve the problem. Not home now. Will
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on
behalf of Kevin Gibbs <kevjazz@xxxxxx>
Sent: Friday, May 26, 2017 7:05:28 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Help recording content from old DAT Machine
into Sonar 8.5
Floyd,
Just got an email from another list recommending that I check my sample
wrote:
Sent from my iPhone
On May 26, 2017, at 5:41 PM, floyd white <cavernrecording@xxxxxxxxx>
To save space.
Hi Kevin,
I'm not familiar with your interface but do you have any way of
using analog outs from your DAT into your interface?
On 5/26/17, Kevin Gibbs <kevjazz@xxxxxx> wrote:
Dear all,
I really need help on this one. I own a DAT Machine which is
connected via SPDIF to my focus right 18i20. Yesterday, and for a
couple days before then, I was transferring The contents of old
DAT tapes into sonar without any issues.
Today, when I fired up my system to continue making these
transfers, I was on able to record anything at all. I also tried
this in Reaper. I should note that I opened and armed Reaper
first, before opening sonar, because I wanted to save my files as FLAC
PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!
When I was on able to record in reaper, I opened sonar and
discovered that I couldn't get any content there, either.
For the sake of this discussion, I will stay focused in sonar.
Here are the things I have done:
I made sure that the track I wanted was assigned to the SPDIF
input and the master output.
2. Made sure that the track was armed and that input monitoring
was enabled.
3. For the record, I had done the same things in reaper when I
tried that as well.
I know that the tapes have content because I monitored through my
headphones using the headphone jack on the DAT Machine.
I also have enough vision to see the display on the DAT Machine
and saw the VU meters registering as the content played.
While this should not have been necessary I also reached back to
make sure that my cables were properly seated. These cables are
almost brand-new in as much as they have almost never been used.
Also made sure that SPDIF what is enabled in my focus right
control panel. I don't need accessibility I have enough vision to
use a mouse when necessary.
Powered down and rebooted computer twice.
WTF?
Any help greatly appreciated from reaper or sonar or Samplitude users.
Haven't gone to Samplitude yet because I don't think the choice of
DAW has anything to do with this.
Thanks for any help,
Kevin
Sent from my iPhone
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject?q or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq