[ddots-l] Re: Fw: domention pro with hsc?
- From: "D!J!X!" <megamansuperior@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 6 Mar 2007 11:54:57 -0500
No, you open the dimension window, you tab to the preset combo box, you
route jaws to pc, you activate jaws cursor, then press down arrow once.
Then begin to press left arrow and checking coordinates by alt numpad
delete, till you hear the 65, 69 or similar coordinates. Then you press left
mouse click wait a while and the browser will open.
HTH, D!J!X!
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Ramy Moustafa
Sent: Tuesday, March 06, 2007 11:22 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Fw: domention pro with hsc?
sorry for asking
but what can i find when checking the coordinates
must i find certain word?
Cheers:
Ramy moustafa,
if music be the food of love, play on...
be treated as equals, -- and communication is the way we can bring this
about."
Louis Braille (1841), (1809 - 1852)
Email and msn and yahoo :
flutelover@xxxxxxxx
Yahoo ID:
goldenear82@xxxxxxxxx
mobile:
0020102221750
skype:
roma 30,
----- Original Message -----
From: D!J!X! <mailto:megamansuperior@xxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, March 06, 2007 6:05 PM
Subject: [ddots-l] Re: Fw: domention pro with hsc?
No, this has nothing to do with graphics; you use the alt numpad delete key
set to check your screen coordinates, jaws should say something like Jaws
cursor active, 65, 69. You go to the preset line, press down arrow once,
then press left arrow a few times; then check the coordinates, press left
arrow and check again, etc. Make sure your jaws cursor is active.
HTH, D!J!X!
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Ramy Moustafa
Sent: Tuesday, March 06, 2007 10:57 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Fw: domention pro with hsc?
in this case must i set my graphic verbosity to all, or labled?
i can't see this graphic at all.
Cheers:
Ramy moustafa,
if music be the food of love, play on...
be treated as equals, -- and communication is the way we can bring this
about."
Louis Braille (1841), (1809 - 1852)
Email and msn and yahoo :
flutelover@xxxxxxxx
Yahoo ID:
goldenear82@xxxxxxxxx
mobile:
0020102221750
skype:
roma 30,
----- Original Message -----
From: D!J!X! <mailto:megamansuperior@xxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, March 06, 2007 5:21 PM
Subject: [ddots-l] Re: Fw: domention pro with hsc?
Hey if you click on 65x69 or somewhere near there, on a 1024 system, a
treeview pops up, you just run the color highlight and then you can just us
the arrows to read the standard tree. an easy way to get to the tree
coordinates is to go to the preset box, route jaws to pc, down arrow once,
and move mouse left a few pixels, and read jaws or u can just press left
arrows a few times and it'll eventually get around 65x69 or somewhere around
there... It also might take a few seconds for the tree to emerge, as it has
to collect all your patches from the folders in dimension's vast library.
HTH, D!J!X!
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Greg Brayton
Sent: Friday, March 02, 2007 3:51 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Fw: domention pro with hsc?
Well I've not used HSC, but here's what I do to get dimension pro going,
alt i then x, pick dimension pro from the list, hit enter,
alt v and h, for synth rack,
alt x again, to choose the dimension pro from the list of inserted synths,
hit enter,
thenp to go in to properties,
page up, then arrow down twice,
go to jaws curser, not routing jaws to pc, just jaws curser,
I use insert and the arrow keys, to find, graphic, 138, it's usually right
near where I start, one or two arrows,
once on that graphic,
alt shift, and the numpad, 4, 12 times,
Jaws says, mouse left each time,
I then hit the pc curser, do a say line, and find myself, at the top of the
dimension pro, presets,
I have to down arrow, and hit say line to read each branch,
to hear a patch, I must hit enter on it,
I then have to use the jaws curser again, to find the tree, left click, and
continue down it as before.
If this sounds like a lot to you, I gotta tell ya, it seems like a bunch to
me too.
I do use it, but it's not what I'd call real easy to use.
On the other hand,
stineburg hypersonic is so easy.
So is lounge lizard.
I'd like to know from anyone on this list, what other soft synths are as
easy to use as the stineburg especially.
Man for me, that's the one.
http://www.gbrayton.com
----- Original Message -----
From: Ramy <mailto:flutelover@xxxxxxxxx> Moustafa
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, March 02, 2007 7:58 AM
Subject: [ddots-l] Fw: domention pro with hsc?
----- Original Message -----
Subject: domention pro with hsc?
hi all, yesterday, i recieved my copy of dymention pro, its great thing with
more orchestral and drums sounds,
but i have only a problem, i can load patches but with more and more luck,
just i found a word called no, then hit down errow and hit left click,
sometimes it succeed and some thimes, no,
jaws can't read at all,
so, in a very very simple way, how can i use the hsc just for spotting this
graphic in order to load patches?
and the other question, is i can't find any wood wins or brasss in this
synth, why? or i missed something?
thanks
Cheers:
Ramy moustafa,
if music be the food of love, play on...
be treated as equals, -- and communication is the way we can bring this
about."
Louis Braille (1841), (1809 - 1852)
Email and msn and yahoo :
flutelover@xxxxxxxx
Yahoo ID:
goldenear82@xxxxxxxxx
mobile:
0020102221750
skype:
roma 30,
Other related posts:
