On Tue, 02 Oct 2012 14:44:05 +0100 Gavin Crawford <gav@xxxxxxxxxxxxxx> wrote: > In message <20121002102538.69a05498@MDXU> > Martin Devon <martin.devon@xxxxxxxxxxxxxx> wrote: > > Is this using the RISC OS version of OPro? I'm assuming it is. > > > Am I missing something, or is there a problem? Can anyone help, please? > > I have no problem printing to A1 using the PS3 driver. > > > Trying to print an A1 poster to PDF or PS using PDF3. The master frame > > is 800 x 550 so there should be plenty of margin round an A1 and the > > paper size is set in the PS3 driver to generic A1, 840 x 594. > > Is it the master frame or the _page size_ that is set to 800 x 550. If > your page size is set bigger than the paper size then you'll get the > warning. > > 800 x 550 : is this width by height? Are you print settings set to the > correct orientation? i.e. should you be printing landscape by > selecting 'Sideways'? > > I'd check other print settings (click Print setup to open the full > print dialogue box) check that Bleed or Printers marks are not > selected. Printers marks will require extra space around the page size > to print the crops etc, the paper size in !Printers will need to > accommodate them. I'm not sure if bleed will actually trigger the > waring, I think it will just print an area larger than the page size. > > > Every time, I am getting the message "image is larger than the paper > > size and will be cropped". > > A good check before printing is look at the X and Y figures if the > Centre option is selected, as it will indicate if the page won't fit > on the paper with a negative number. > > > Martin > > Hope that helps, > Gavin. Thanks Gav, printers marks is the answer. Thanks also to all others. -- Martin R Devon MSc Consulting Engineer, Box, Wiltshire, UK RISC OS in the timber-frame housing industry To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling