Plughw was my mistake. Thank you for pointing that out! 73 -- Phil / w2lie Please excuse any typing errors, message sent from my iPhone On Dec 20, 2010, at 10:53 AM, Ross Wille <darkice@xxxxxxxxxxxx> wrote: > This may not be your root problem, but the device names should be plughw:0,0 > and hw:0,0 not hw0:0 and hwplug:0,0. > > On Sunday 19 December 2010 14:02, Phil wrote: >> Niels, >> Thanks again for the help.. >> As you can tell, I'm stil a little wet behind the ears when it comes to >> Linux. >> >> I've looked for the darkice docs, but came up short. >> I also looked in darkice man and didn't see what I needed. >> >> Here is an 'echo' on what you said I should look at: >> linux-zitz:/usr/bin # aplay -l >> **** List of PLAYBACK Hardware Devices **** >> card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel >> 82801DB-ICH4] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: >> I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel >> 82801DB-ICH4 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 >> linux-zitz:/usr/bin # aplay -L >> default:CARD=I82801DBICH4 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> Default Audio Device >> front:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> Front speakers >> surround40:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> 4.0 Surround output to Front and Rear speakers >> surround41:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> 4.1 Surround output to Front, Rear and Subwoofer speakers >> surround50:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> 5.0 Surround output to Front, Center and Rear speakers >> surround51:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 >> 5.1 Surround output to Front, Center, Rear and Subwoofer speakers >> iec958:CARD=I82801DBICH4,DEV=0 >> Intel 82801DB-ICH4, Intel 82801DB-ICH4 - IEC958 >> IEC958 (S/PDIF) Digital Audio Output >> null >> Discard all samples (playback) or generate zero samples (capture) >> linux-zitz:/usr/bin # aplay >> >> I tried setting: >> device = hwplug:0,0 >> >> And >> >> device = hw0:0 >> >> And neither seemed to work. Also, device = default failed as well. >> >> Thanks again for helping me out. >> Phil