Re: [cpsig] Re: Ballast for KVR

  • From: "Roger Burrows" <rgburrow@xxxxxxxx>
  • To: <cpsig@xxxxxxxxxxxxxxx>
  • Date: Sun, 6 Dec 2009 15:51:20 -0800

Joe writes:
| "No slag ballast on the KV that I'm aware of. 
A little bit of
| Kimberley float was used in tiny spots here 
and there during the 1960s, but
| on the KV the ballast of choice was gravel."

I agree, Joe.  From what I have seen, and walked 
upon, both before and after abandonment, ballast 
was pit-run gravel, possibly partially-screened 
to remove fines and oversize material.

In addition, based on what I have seen, the ends 
of many sidings were comprised of cinders.  This 
would have occurred when fireboxes were cleaned 
and maintained while waiting for meets.  Also, 
if I'm not mistaken, cinders were used in 
Penticton and Brookmere yards (and probably in 
other locations), no doubt from the ashpits in 
those locations.

Do we know from what pits the gravel ballast 
originated?

Roger Burrows
North Vancouver 




Other related posts: