Hello Tony.... Hope springs eternal. Not ready yet.... I'm having a few problem. I'll get back to you ASAP> Thanks, Robert On Mon, Apr 9, 2012 at 9:46 AM, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote: > Hi Tony, > > please give me till 17:00 UTC before downloading and trying again. I want > to put some more debugging stuff up there. > > REGARDING: ILS > > Looking back at the log, Michelle said: > > Michelle said, ’The localizer’s alive’ 6:57:46 AM > Michelle said, ’The glide slope’s alive’ 6:58:03 AM > > So, she should have no trouble capturing the Localizer or the glideslope. > > REGARDING: Local Traffic > > Mea culpa. Upon closer review, I see the switch to the advisory and the > "Announce Position" statement you made. Sorry. > > REGARDING: Clear of the runway > > After leaving the runway, you should be able to say... > > "Clear of the runway" > > r :) > > > > > On Mon, Apr 9, 2012 at 9:26 AM, Tony <tonys_groups@xxxxxxxxxxxxxx> wrote: > >> Do you want me to start remote debugging again?**** >> >> ** ** >> >> T**** >> >> ** ** >> >> *From:* bvipilots-bounce@xxxxxxxxxxxxx [mailto: >> bvipilots-bounce@xxxxxxxxxxxxx] *On Behalf Of *Robert Cezar >> *Sent:* 09 April 2012 16:26 >> >> *To:* bvipilots@xxxxxxxxxxxxx >> *Subject:* [bvipilots] Re: Two observations**** >> >> ** ** >> >> Hi Tony,**** >> >> ** ** >> >> IYP Version 4.1.0.268 is now available for download that has some >> additional error trapping.**** >> >> ** ** >> >> Please load the CYXJ to CYQU flight.**** >> >> Launch IYP**** >> >> Press CTRL+E to start engine and bring Avionics online.**** >> >> Request IFR Clearance.**** >> >> Once done, say, "Announce Taxi Intentions"**** >> >> ** ** >> >> You will still get the error, but I'll be able to see the erroneous data. >> **** >> >> ** ** >> >> Thanks for your help.**** >> >> ** ** >> >> r :)**** >> >> ** ** >> >> On Mon, Apr 9, 2012 at 7:49 AM, Robert Cezar <robert@xxxxxxxxxxxxxxx> >> wrote:**** >> >> Opssss.... Failed to give you the link Tony!**** >> >> ** ** >> >> Here it is:**** >> >> ** ** >> >> >> http://www.youtube.com/watch?v=_ldmPjw-AAQ&list=UUpFOLjcbPl5ucqT_PekL5kA&index=1&feature=plcp >> **** >> >> ** ** >> >> r :)**** >> >> ** ** >> >> On Mon, Apr 9, 2012 at 7:44 AM, Robert Cezar <robert@xxxxxxxxxxxxxxx> >> wrote:**** >> >> Hello Tony,**** >> >> ** ** >> >> I had the SERVER DEBUGGER on for your entire flight and observed >> everything that was happening in real-time.**** >> >> ** ** >> >> Wow! You did a remarkable job. **** >> >> ** ** >> >> I observed as you perform an ILS approach on runway 29, then at five >> hundred AGL, you executed a "Go Around", came around and did a "Visual >> Approach", it blew my socks off !!!**** >> >> ** ** >> >> I also observed a few errors, the biggest being the "Announce Taxi" >> issue. **** >> >> I will need to put in some further debugging to trap that problem. **** >> >> Once I get that software written, we can address that by merely starting >> the Bravo with CTRL+E, then say, "Announce Taxi Intentions". I will get >> back to you ASAP on this issue.**** >> >> ** ** >> >> Other observation. **** >> >> ** ** >> >> You said to Michelle... "set propeller pitch to low r p m". That is a >> No-No. I'm surprised she could execute the Go Around. **** >> >> It does however, give rise to me writing some code to automatically >> optimise both the Propellor Pitch and Mixture setting in the BVI mode.*** >> * >> >> In the meantime, please leave it set to "High RPM". Thanks.**** >> >> ** ** >> >> You used the syntax:**** >> >> ** ** >> >> "going to one three four point five"**** >> >> "five kilo tango is with you"**** >> >> ** ** >> >> While that is perfectly functional, please try using...**** >> >> ** ** >> >> "Acknowledge Hand Off"**** >> >> "Contact Next Controller"**** >> >> ** ** >> >> so I can be sure it works in all cases. Thanks again.**** >> >> ** ** >> >> The major issue was the failure to contact the Local Traffic.**** >> >> ** ** >> >> Please take a listen to this video about 10 minutes in. The entire video >> is 16 minutes long.**** >> >> ** ** >> >> All in All Tony, that was a remarkable flight !!!**** >> >> ** ** >> >> I will get back to you ASAP on the taxi stuff. Thanks for all you help.** >> ** >> >> ** ** >> >> Best regards,**** >> >> ** ** >> >> Robert**** >> >> **** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> On Mon, Apr 9, 2012 at 2:07 AM, Tony <tonys_groups@xxxxxxxxxxxxxx> wrote: >> **** >> >> I think, it would help more were I to take the trouble to read the >> documentation.**** >> >> **** >> >> I haven’t read it in a while, and just ploughed on with the testing.**** >> >> **** >> >> I’ll be sure to in future before posting any issues, sorry about that.*** >> * >> >> **** >> >> T**** >> >> **** >> >> *From:* bvipilots-bounce@xxxxxxxxxxxxx [mailto: >> bvipilots-bounce@xxxxxxxxxxxxx] *On Behalf Of *Robert Cezar >> *Sent:* 09 April 2012 08:17 >> *To:* bvipilots@xxxxxxxxxxxxx >> *Subject:* [bvipilots] Re: Two observations**** >> >> **** >> >> Hello Tony,**** >> >> **** >> >> Referring to the Code Revisions section located here:**** >> >> **** >> >> http://www.itsyourplane.com/html/revisions.asp **** >> >> **** >> >> there's a link to the evolving SimpleATC formal documentation located >> here:**** >> >> **** >> >> http://www.itsyourplane.com/html/satc.asp **** >> >> **** >> >> Under the SimpleATC section, there's a lot of information about this >> pending version. One of the notes reads:**** >> >> **** >> >> NOTE: In the Blind Pilot mode, the ATC Window remains open at all times >> while in flight. This feature can be enabled and disabled. See Voice >> Commands > Blind Pilots/Visually Impaired area for details. In the:**** >> >> **** >> >> Voice Commands > Blind Pilots/Visually **** >> >> **** >> >> section, it reads:**** >> >> **** >> >> Maintain ATC Window open during flight**** >> >> B V I A T C on**** >> >> B V I A T C off**** >> >> Since totally blind pilots cannot see whether or not the ATC window is >> open, by activating BVI ATC, the ATC window remains open during flight. For >> those who are visually impaired, they can deactivate this feature.**** >> >> NOTE:: Effective Version 4.1.0.266.**** >> >> **** >> >> I will be releasing BETA Version 4.1.0.267 in a few minutes that will >> address a few of the items that have been raised of late... like the Cowl >> Flaps.**** >> >> **** >> >> Please keep in mind that BETA 4.1.0.267 is NOT what the final release >> will be labelled. The final release will stall be called: 4.1.0.266. I'm >> only raising the BETA version to the next minor version so I can be sure >> BETA testers are running the correct software. It also means that you can >> simply install the software, without having to uninstall the previous >> version 266.**** >> >> **** >> >> I hope that's clear... <LOL>**** >> >> **** >> >> Thanks for all of your help Tony.**** >> >> **** >> >> Regards,**** >> >> **** >> >> Robert**** >> >> **** >> >> **** >> >> **** >> >> **** >> >> On Sun, Apr 8, 2012 at 11:05 PM, Tony <tonys_groups@xxxxxxxxxxxxxx> >> wrote:**** >> >> Hi Robert **** >> >> **** >> >> I’ve always had those options set.**** >> >> **** >> >> Regarding ATC, what used to happen is that the ATC menu could be closed >> either by saying toggle ATC or by use of the scroll lock.**** >> >> **** >> >> It would then remain closed until a Controller issued an order or told me >> off.**** >> >> **** >> >> Now though, it appears to remain open constantly, i.e. it can be closed >> yet opens again almost at once.**** >> >> **** >> >> Guess it doesn’t matter that much to a BVI pilot, not sure what someone >> watching would see though.**** >> >> **** >> >> T**** >> >> **** >> >> *From:* bvipilots-bounce@xxxxxxxxxxxxx [mailto: >> bvipilots-bounce@xxxxxxxxxxxxx] *On Behalf Of *Robert Cezar >> *Sent:* 09 April 2012 06:51 >> *To:* bvipilots@xxxxxxxxxxxxx >> *Subject:* [bvipilots] Two observations**** >> >> **** >> >> Hi,**** >> >> **** >> >> I made two observations that are very relevant for BVI users:**** >> >> **** >> >> 1. Pause on Task Switch**** >> >> **** >> >> You need to disable this setting, otherwise, when ALT-TABBING away from >> the simulator, it will go into PAUSE mode. Please do the following:**** >> >> **** >> >> With the simulator in view, press ALT, followed by the letters O, E, G to >> get to the General Options. **** >> >> **** >> >> Within the section on the left side entitled: **** >> >> **** >> >> Program **** >> >> **** >> >> the second check box down is entitled:**** >> >> **** >> >> Pause on Task Switch **** >> >> **** >> >> Please ensure that this check box in UNCHECKED. **** >> >> **** >> >> 2. In the same panel, on the right hand side under the section entitled:* >> *** >> >> **** >> >> Air Traffic Control**** >> >> **** >> >> please ensure that the check box entitled:**** >> >> **** >> >> Auto-open ATC window**** >> >> **** >> >> is CHECKED.**** >> >> **** >> >> Once done, press ENTER to return to the simulator's main view. **** >> >> **** >> >> Regards,**** >> >> **** >> >> Robert**** >> >> **** >> >> >> **** >> >> **** >> >> -- **** >> >> **** >> >> AOPA Member No: 06936977**** >> >> **** >> >> **** >> >> >> >> **** >> >> **** >> >> -- >> **** >> >> **** >> >> AOPA Member No: 06936977**** >> >> **** >> >> **** >> >> >> >> **** >> >> ** ** >> >> -- >> **** >> >> ** ** >> >> AOPA Member No: 06936977**** >> >> ** ** >> >> ** ** >> >> >> >> **** >> >> ** ** >> >> -- >> **** >> >> ** ** >> >> AOPA Member No: 06936977**** >> >> ** ** >> >> ** ** >> >> >> >> **** >> >> ** ** >> >> -- >> **** >> >> ** ** >> >> AOPA Member No: 06936977**** >> >> ** ** >> >> ** ** >> > > > > -- > > > AOPA Member No: 06936977 > > > -- AOPA Member No: 06936977