[bvipilots] Re: Simple ATC question
- From: Nick Helms <nick.helms@xxxxxxxxx>
- To: bvipilots@xxxxxxxxxxxxx
- Date: Fri, 4 May 2012 10:39:53 -0700
Thank you for your reply, it feels great to be getting back into it! I
did all the checklists, the insident happend when Michel asked me to
request IFR clearence. As I believe the documentation stated, I said,
request IFR clearence. She said, Please wait, but nothing happend. She
then asked me to request IFR clearence again. Is there something I
neglected to activate? Also, Would it be possible to see a cockpit
transcript of your flight into San Jose? In fact, I was attempting a
flight from SJC to LAX using the same aircraft!
On 5/4/12, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
> Hi Nick,
>
> Well, after you say, "Reset cold and dark", the battery switch and all of
> the electronics are off.
>
> I just conducted a complete flight from Santa Maria, California (KSMX) to
> San Jose, California (KSJC) in a Boeing 737-400 using FS9 and IYP Version
> 4.1.0.267. The entire flight was absolutely flawless... including an ATC
> request to make a Visual Approach into San Jose.
>
> May I kindly make the following suggestions?
>
> 1. Please read ALL of the documentation about the NEW SimpleATC+ system
> located here:
>
> http://www.itsyourplane.com/html/satc.asp<view-source:http://www.itsyourplane.com/html/satc.asp>
>
> 2. After you say, "Reset cold and dark", say the phrase... "Do all
> checklists" and conduct the flight in the traditional and recommended
> manner.
>
> It's wonderful to have one of our original BVI members back into the fold.
> I am sure you can provide a lot of assistance to some of the newer BVI
> members given your vast prior experience with IYP. However, keep in kind
> that a lot of new BVI features have been added to the system since you were
> with us.
>
> Welcome home!
>
> Regards,
>
> Robert
>
>
>
>
>
>
>
> On Fri, May 4, 2012 at 7:20 AM, Nick Helms <nick.helms@xxxxxxxxx> wrote:
>
>> Hello all,
>> Recently, I've attempted to get back into flying after more than a
>> year away from my simulator. I'm using FS9 on a laptop running windows
>> 7(64 bit)with the latest version if IYP.
>> I don't know if this is spasific to me, but I've noticed, when
>> attempting to use the simple atc feature to request ifr clearence
>> after resetting the aircraft to cold and dark, the FO will say,
>> please wait, but nothing happens.
>> I've tried this several times, with the same result. I'd like to get
>> this figured out, because I'm really quite tired of trying to
>> memmorise key sequences at different airports.
>> Thanks for your time and for keeping the mailinglist alive!
>> all the best,
>> Nick
>>
>> --
>> Nick Helms
>> P.L.U.R.
>> Blind and Visually impaired Pilots mailinglist
>> //www.freelists.org/list/bvipilots
>> To post a message to the list, send a message to
>> bvipilots@xxxxxxxxxxxxx
>> To unsubscribe, send a message to
>> bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
>> subject of your message.
>> For other options such as digest, send a message to
>> bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
>> your message.
>>
>
>
>
> --
>
>
> AOPA Member No: 06936977
>
--
Nick Helms
P.L.U.R.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of
your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Other related posts:
