[bvipilots] Re: Commands
- From: Robert Cezar <robert@xxxxxxxxxxxxxxx>
- To: bvipilots@xxxxxxxxxxxxx
- Date: Fri, 23 Mar 2012 13:10:44 -0700
Hello Ron,
Please keep in mind that if you had already filed and flew a flight plan
from say Seattle (KSEA) to Vancouver (CYVR), then upon landing in
Vancouver, you decide to immediately taxi to Runway Two Six Left, it will
NOT work. Why? Because the departing airport remains Seattle (KSEA) and
there isn't a Runway Two Six Left at Seattle. You would need to say, "Make
the origination airport Charlie Yankee Victor Romeo" first, then you could
say, "Taxi to and hold short of runway Two Six Left". I hope this helps.
Robert
On Fri, Mar 23, 2012 at 12:02 PM, Ron Kolesar
<kolesar16417@xxxxxxxxxxxxxx>wrote:
> Hey Jordan.
> I'm just glad that I could help you out.
> I hope that it worked.
> Blind Pilot.
>
>
>
>
> Ron and current Leader Dog boz who states
> "that a service dog beats a cane paws down any day of the week."
> -----Original Message----- From: Jordan Gallacher
> Sent: Friday, March 23, 2012 2:48 PM
>
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Re: Commands
>
> Oops. You are correct.
>
> Jordan
>
> -----Original Message-----
> From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@**
> freelists.org <bvipilots-bounce@xxxxxxxxxxxxx>]
> On Behalf Of Ron Kolesar
> Sent: Friday, March 23, 2012 12:26 PM
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Re: Commands
>
> Do not use 26 left.
> Use 2 6 left instead.
> Try that and see if it helps.
>
>
>
> Ron and current Leader Dog boz who states
> "that a service dog beats a cane paws down any day of the week."
> -----Original Message----- From: Jordan Gallacher
> Sent: Friday, March 23, 2012 12:06 PM
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Re: Commands
>
> The commands I use for taxiing are as follows.
> Michelle lets taxi to and hold short of runway 26 left
> Michelle let's taxi to runway 26 left
> Michelle let's taxi to Gate Alpha 3
> Michelle Let's Taxi to General Aviation Parking.
> I was using Grand Rapids International KGRR for this example, but this
> should work at all airports provided you give Michelle the correct runway.
> Hope this helps,
> Jordan
> -----Original Message-----
> From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@**
> freelists.org <bvipilots-bounce@xxxxxxxxxxxxx>]
> On Behalf Of Adam
> Sent: Friday, March 23, 2012 10:58 AM
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Re: Commands
>
> Good to know! Lol Smile I thought it might be me!
>
>
>
> Stealth
> 12844
> Have a good Day!
>
> -----Original Message-----
> From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@**
> freelists.org <bvipilots-bounce@xxxxxxxxxxxxx>]
> On Behalf Of Jordan Gallacher
> Sent: Friday, March 23, 2012 10:56 AM
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Re: Commands
>
> You are having the exact same problem I am having. Oddly enough, it only
> seems to be a problem with the Cessna aircraft because the King Air and
> Baron 58 do not have that issue. Frustrating because I have a few flights
> where I use the 172 and the 208 and I currently cannot use either one of
> those aircraft.
> Jordan
>
> -----Original Message-----
> From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@**
> freelists.org <bvipilots-bounce@xxxxxxxxxxxxx>]
> On Behalf Of Adam
> Sent: Friday, March 23, 2012 10:24 AM
> To: bvipilots@xxxxxxxxxxxxx
> Subject: [bvipilots] Commands
>
> Hello to all,
> Ok here is what is happening need help or know what I am doing wrong!
> Let's
> say that I am doing one of the quick flights for example I am flying out of
> KSEA Using the Cessna 172 I am having trouble in these areas!
> First of all it seems I am having trouble to get the aircraft to taxi
> correctly. Secondly when in the air and I want to set my altitude to 3,500
> feet I say climb and maintain 3,500 Michelle confirms it but when the
> aircraft climbs it don't stop it just keeps climbing. What am I doing
> wrong?
> Also if I tell Michell to descend and maintain 2,200 it also just keeps
> climbing! Even if I say set the rate of (Climb or descent) to 500 or
> whatever and I ask Michell to verify it always tells me the vertical speed
> is something other than what I am asking her to do!
> My assumption here is that even though Michel is confirming and recognizing
> my commands it's not applying them! However everything else is working
> fine! Up to this point!
>
> Thanks for any help or suggestions!
>
>
>
>
> Stealth
> Have a Good day!
>
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxxxx
> unsubscribe, send a message to
> bvipilots-request@freelists.**org<bvipilots-request@xxxxxxxxxxxxx>and put the
> word unsubscribe in the subject of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your
> message.
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxxxx
> unsubscribe, send a message to
> bvipilots-request@freelists.**org<bvipilots-request@xxxxxxxxxxxxx>and put the
> word unsubscribe in the subject of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your
> message.
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to
> bvipilots@xxxxxxxxxxxxx
> To unsubscribe, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word unsubscribe in the subject
> of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your
> message.
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to
> bvipilots@xxxxxxxxxxxxx
> To unsubscribe, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word unsubscribe in the subject
> of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your
>
> message.
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to
> bvipilots@xxxxxxxxxxxxx
> To unsubscribe, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word unsubscribe in the subject
> of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your
> message.
>
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to
> bvipilots@xxxxxxxxxxxxx
> To unsubscribe, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word unsubscribe in the subject of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your message.
> Blind and Visually impaired Pilots mailinglist
> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
> To post a message to the list, send a message to
> bvipilots@xxxxxxxxxxxxx
> To unsubscribe, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word unsubscribe in the subject of your message.
> For other options such as digest, send a message to
> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
> put the word help in the subject of your message.
>
--
AOPA Member No: 06936977
Other related posts:
