[bvipilots] Re: Commands

  • From: "Adam " <brailledog@xxxxxxx>
  • To: <bvipilots@xxxxxxxxxxxxx>
  • Date: Fri, 23 Mar 2012 21:18:55 -0500

As far as the taxi thing goes I fixed that it was a mistake on my part sorry
about that! 

 

In regards to the altitude goes!

All checklists have been performed Michell is controlling the airspeed and
auto pilot is on!  

I have also seen that a few other members are experiencing the same issue
with the Cessna!  

Thanks 

 

 

 

Stealth

12844

Have a good Day!

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Robert Cezar
Sent: Friday, March 23, 2012 5:20 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Commands

 

Hello Stealth,

 

Thank you.

 

REGARDING: I am having trouble to get the aircraft to taxi correctly.

 

Can you please explain (in precise terms) the problems you are experiencing?
Thank you.

 

REGARDING: When in the air and I want to set my altitude to 3,500

feet I say climb and maintain 3,500 Michelle, confirms it but when the

aircraft climbs it don't stop. it just keeps climbing. 

 

Is the Auto-Pilot turned on?

Is this happening when executing the Take Off checklist?

Is Michelle controlling the air speed?

 

Please advise.

 

Thank you.

 

Robert

 

 

On Fri, Mar 23, 2012 at 2:46 PM, Adam <brailledog@xxxxxxx> wrote:

Pilot #: 12844

Operating system: Windows 7 service pack 1

Simulator: FX 

IYP: 4.1266 

 

 

 

 

Stealth

12844

Have a good Day!

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Robert Cezar
Sent: Friday, March 23, 2012 1:33 PM


To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Commands

 

Hello Stealth,

 

Can I please have your Pilot Number in order to better assist you?

Can you please tell me your Operating System - XP, Vista or Windows 7?

Can you please tell me what simulator you are using?

Can you please indicate what Version of IYP you are using? 

 

Thank you.

 

REGARDING: I am having trouble to get the aircraft to taxi correctly.

 

Can you please explain (in precise terms) the problems you are experiencing?
Thank you.

 

REGARDING: When in the air and I want to set my altitude to 3,500

feet I say climb and maintain 3,500 Michelle, confirms it but when the

aircraft climbs it don't stop. it just keeps climbing. 

 

Is the Auto-Pilot turned on?

Is this happening when executing the Take Off checklist?

Is Michelle controlling the air speed?

 

Please advise.

 

Thank you.

 

Robert

 

 

 

On Fri, Mar 23, 2012 at 8:23 AM, Adam <brailledog@xxxxxxx> wrote:

Hello to all,
Ok here is what is happening need help or know what I am doing wrong!  Let's
say that I am doing one of the quick flights for example I am flying out of
KSEA Using the Cessna 172  I am having trouble in these areas!
First of all it seems I am having trouble to get the aircraft to taxi
correctly. Secondly when in the air and I want to set my altitude to 3,500
feet I say climb and maintain 3,500 Michelle confirms it but when the
aircraft climbs it don't stop it just keeps climbing.  What am I doing
wrong?
Also if I tell Michell to descend and maintain 2,200 it also just keeps
climbing!  Even if I say set the rate of (Climb or descent) to 500 or
whatever and I ask Michell to verify it always tells me the vertical speed
is something other than what I am asking her to do!
My assumption here is that even though Michel is confirming and recognizing
my commands it's not applying them!  However everything else is working
fine! Up to this point!

Thanks for any help or suggestions!




Stealth
Have a Good day!


Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.





 

-- 
Image removed by sender.

 

AOPA Member No: 06936977

 

 





 

-- 
Image removed by sender.

 

AOPA Member No: 06936977

 

 

JPEG image

Other related posts: