[braillesupport] Re: Braille usage between NVDA and Orbit 20 Reader

  • From: "Cearbhall O'Meadhra" <cearbhall.omeadhra@xxxxxxx>
  • To: <braillesupport@xxxxxxxxxxxxx>
  • Date: Thu, 29 Oct 2020 12:43:58 -0000

Hi all,

 

At the meeting last week I undertook to check to see if

The Orbit 20 Reader would work with NVDA using Bluetooth. In summary, yes,
it does work perfectly.

 

There is a bit of a story in the effort to find this answer. I found the
following points are necessary to ensure success:

1.      Set the Orbit so that the Bluetooth option is "Auto" (this is the
default)
2.      Set the Orbit so that the pairing option is "Just Works" (this is
the default)
3.      Enable Bluetooth on the PC and pair with the Orbit 20 reader
4.      Ensure that Bluetooth is active on the PC
5.      Ensure that Bluetooth is turned off in all other devices paired with
the Orbit 20 Reader; (see explanation below)
6.      Turn on the Orbit 20 reader 
7.      Restart NVDA 
8.      The text spoken by NVDA appears in the Orbit 20 Reader in grade 1
braille.

 

I experienced great difficulty getting the Orbit to display the NVDA output
until I realised that I had Bluetooth On in my iPhone and this grabbed the
Orbit, preventing the link from the PC from being effective. When I turned
off the Bluetooth engine in the iPhone, NVDA appeared on the Orbit display
immediately after restarting NVDA.

 

NVDA is configured to connect immediately with its default Braille settings
as long as the Orbit is in Auto mode.

 

Interestingly, I found that the Orbit goes into edit mode if the PC is
editing. When I turned on the Orbit to write this email, I was immediately
able to type these words and backspace, delete  and retype using the Orbit
alone!

 

Another curious feature occurs when I am connected to the PC and NVDA and
decide to turn off the Orbit using its power buttons, so that it is not just
in sleep mode. When I turn the Orbit back on it ignores the PC and NVDA and
wakes up the iPhone, turning on the Bluetooth setting if it is off on the
iPhone! To get the Orbit back to the PC and NVDA, I need to turn off the
Bluetooth setting on the iPhone, touch nothing on either the iPhone or the
Orbit, restart NVDA and then the Orbit responds to NVDA, ignoring the
iPhone! It is like a battle between the iPhone and the PC!

 

Have fun!

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@xxxxxxx

 



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Other related posts: