[braillesupport] Re: Braille usage between NVDA and Orbit 20 Reader

  • From: "Flor Lynch" <florlync@xxxxxx>
  • To: <braillesupport@xxxxxxxxxxxxx>
  • Date: Sat, 31 Oct 2020 11:40:39 -0000

I think it’s the Orbit Reader 20+ (not the original Orbit Reader) that has 
five Bluetooth connections?

Cearbhall, how do you find the Braille keyboard on the Orbit Reader, , for 
regular use? Some users complain that the keys are too small. (I didn’t find 
that, although the time I had it was brief.)

From: Cearbhall O'Meadhra
Sent: Thursday, October 29, 2020 12:43 PM
To: braillesupport@xxxxxxxxxxxxx
Subject: [braillesupport] Re: Braille usage between NVDA and Orbit 20 Reader
Hi all,



At the meeting last week I undertook to check to see if

The Orbit 20 Reader would work with NVDA using Bluetooth. In summary, yes, 
it does work perfectly.



There is a bit of a story in the effort to find this answer. I found the 
following points are necessary to ensure success:

  1.. Set the Orbit so that the Bluetooth option is “Auto” (this is the 
default)
  2.. Set the Orbit so that the pairing option is “Just Works” (this is the 
default)
  3.. Enable Bluetooth on the PC and pair with the Orbit 20 reader
  4.. Ensure that Bluetooth is active on the PC
  5.. Ensure that Bluetooth is turned off in all other devices paired with 
the Orbit 20 Reader; (see explanation below)
  6.. Turn on the Orbit 20 reader
  7.. Restart NVDA
  8.. The text spoken by NVDA appears in the Orbit 20 Reader in grade 1 
braille.


I experienced great difficulty getting the Orbit to display the NVDA output 
until I realised that I had Bluetooth On in my iPhone and this grabbed the 
Orbit, preventing the link from the PC from being effective. When I turned 
off the Bluetooth engine in the iPhone, NVDA appeared on the Orbit display 
immediately after restarting NVDA.



NVDA is configured to connect immediately with its default Braille settings 
as long as the Orbit is in Auto mode.



Interestingly, I found that the Orbit goes into edit mode if the PC is 
editing. When I turned on the Orbit to write this email, I was immediately 
able to type these words and backspace, delete  and retype using the Orbit 
alone!



Another curious feature occurs when I am connected to the PC and NVDA and 
decide to turn off the Orbit using its power buttons, so that it is not just 
in sleep mode. When I turn the Orbit back on it ignores the PC and NVDA and 
wakes up the iPhone, turning on the Bluetooth setting if it is off on the 
iPhone! To get the Orbit back to the PC and NVDA, I need to turn off the 
Bluetooth setting on the iPhone, touch nothing on either the iPhone or the 
Orbit, restart NVDA and then the Orbit responds to NVDA, ignoring the 
iPhone! It is like a battle between the iPhone and the PC!



Have fun!



All the best,



Cearbhall



m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@xxxxxxx






--------------------------------------------------------------------------------
        This email has been checked for viruses by Avast antivirus software.
      www.avast.com


Other related posts: