Hi John, What kind of expert are you looking for? I have studied Mac programming in the hopes of one day creating my own applications. I am also subscribed to the accessibility developers mailing list from Apple. Let me know what help you need. I would be thrilled to coordinate the Mac development of Braille Blaster. Regards, Alex, On 2010-11-30, at 1:58 PM, John J. Boyer wrote: > Kieth, > > Your message was sent from an address which is not subscribed to the > braileblaster list, so had to forward it. > > Is your problem basically hardware or software? You should be able to > send a plain-text file to the embosser and get braille. If not, the > problem may be hardware. > > BrailleBlaster will tackle these problems. Using SWT should go a long > way towards solving them. > > It would be nice if we could get a Mac software expert on board. > > John > > On Tue, Nov 30, 2010 at 02:07:24PM -0500, Keith Reedy wrote: >> Hi folks, >> >> With Braille Blaster, will I be able to print BRF and BRL files to my >> Basic-D from my MAC? I have tried a number of things, but, I have not been >> able to make this happen. Right now, I am using an old DOS computer to >> print them. >> Keith Reedy >> Please visit this page and click "Like" if you like! >> http://m.facebook.com/pages/Keith-Reedy/114181261930792?fbb=rd45a72d7&refid=46 >> >> > > -- > My websites: > GodTouches Digital Ministry, Inc. http://www.godtouches.org > Abilitiessoft, Inc. http://www.abilitiessoft.com > Location: Madison, WI, USA > > Alex Jurgensen, VoiceOver Trainer, ASquared21@xxxxxxxxxxxxxxxxx Visit us on the web at: www.vipbc.org