Kieth, Your message was sent from an address which is not subscribed to the braileblaster list, so had to forward it. Is your problem basically hardware or software? You should be able to send a plain-text file to the embosser and get braille. If not, the problem may be hardware. BrailleBlaster will tackle these problems. Using SWT should go a long way towards solving them. It would be nice if we could get a Mac software expert on board. John On Tue, Nov 30, 2010 at 02:07:24PM -0500, Keith Reedy wrote: > Hi folks, > > With Braille Blaster, will I be able to print BRF and BRL files to my Basic-D > from my MAC? I have tried a number of things, but, I have not been able to > make this happen. Right now, I am using an old DOS computer to print them. > Keith Reedy > Please visit this page and click "Like" if you like! > http://m.facebook.com/pages/Keith-Reedy/114181261930792?fbb=rd45a72d7&refid=46 > > -- My websites: GodTouches Digital Ministry, Inc. http://www.godtouches.org Abilitiessoft, Inc. http://www.abilitiessoft.com Location: Madison, WI, USA