Hi Denise, I just did it with the New York Times from Sunday, December 10, which is particularly large. It worked fine. When you point the transfer software to the folder, the only file that will show up is the nl.opf file. Make sure it is selected and hit alt+s and it should work. Now, on some papers there has been an error in the code. They think they have it fixed, but try using the Victor software or the book wizard to read that same paper. If you cannot read it with them, then the file has a problem. If you can read it with other programs, then something may be going on with the Book Port transfer. I would try another paper to see. But, the only file you need to have highlighted is the .opf file. Good luck, Richard _____ From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of denise avant Sent: Wednesday, December 13, 2006 7:44 AM To: bookport@xxxxxxxxxxxxx Subject: [bookport] newsline files hello all, i receive the newsline newspapers by e-mail. these files are in daisy format. i tried for the first time this morning to transfer them to the bookport. i put each newspaper in its own folder. i noticed the file edit field in the bookport transfer tool listed only the file with the .nl extension. in any event, then i highlighted that folder as well as the daisy line in the bookport transfer tool. however, when i pressed the send, the bookport told me it could not transfer the file. was i suppose to select all of the files or is the bookport transfer tool suppose to automatically send them. thanks.