Pamela: I've got version 1.02, with a manual date of 9/15/04. Where is the information I'm looking for? Thanks! John ----- Original Message ----- From: "PAMELA RADER" <PRADER@xxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Wednesday, March 23, 2005 2:58 PM Subject: [bookport] Re: Inputting Braille on the Book Port > Check your Firmware Version to be sure you have that update. You can do > this, by pressing A and C. The version number for this is 1.02. If you > have that version, simply delete the current manual off your card; > connect to the PC, and the new manual will automatically appear. If you > don't have it, delete the current manual, connect to your PC and select > the firmware update from the Options menu. > > > Pamela > > > >>>> lists@xxxxxxxxxx 03/23/05 02:44PM >>> > Hello fellow listers: > > I guess I must have an out-of-date manual because I can't seem to find > any > information on inputting braille characters to the book port. Okay, > obviously, we're talking about use of some group of the eighteen rubber > keys > on the face of the unit, and in order to generate the "cord", we're > talking > about at least one additional key; eight-dot braille (which I doubt is > needed or supported) would, of course, require another two keys. > > Can someone point me to the manual page which talks about this, or just > tell > me which keys are used for inputting braille? > > Many thanks! > > John > > > > > >