Check your Firmware Version to be sure you have that update. You can do this, by pressing A and C. The version number for this is 1.02. If you have that version, simply delete the current manual off your card; connect to the PC, and the new manual will automatically appear. If you don't have it, delete the current manual, connect to your PC and select the firmware update from the Options menu. Pamela >>> lists@xxxxxxxxxx 03/23/05 02:44PM >>> Hello fellow listers: I guess I must have an out-of-date manual because I can't seem to find any information on inputting braille characters to the book port. Okay, obviously, we're talking about use of some group of the eighteen rubber keys on the face of the unit, and in order to generate the "cord", we're talking about at least one additional key; eight-dot braille (which I doubt is needed or supported) would, of course, require another two keys. Can someone point me to the manual page which talks about this, or just tell me which keys are used for inputting braille? Many thanks! John