Jacques: Please check to be sure the unit is being recognized by the PC. You will be able to tell by looking at the bp status in the Book Transfer. Also, you may want to try reformatting the Compact Flash card or try a different card. If it still cannot be updated, please let me know and I'll see if the file is still up on the server and I will supply you with the direct link and instructions. From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Jacques Bosch Sent: Saturday, December 15, 2012 10:14 AM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Firmware 1.2 won't update on original bookport Hi. I got hold of an original Bookport (not the plus) and am trying to get it working. When it starts up it says version 1.2. I am running the latest Bookport Transfer on my Win 7. When I plug the Bookport into the PC, a dialog pops up that says a firmware update is required for the Bookport to read files transferred with this version of the Bookport Transfer. When I say ok, update, it seems to be checking online, and then after a while it says no firmware updates are available. It says the same when I explicitly check for updates from under Options > Advanced. I know the latest firmware is 2.3. So why won't it update from version 1.2? Any ideas? Thank you much. Jacques