Don,
Those seats look like what is in one of my Bobsy Vanguards. I will take
pictures, measurements and post them here when I get a chance. I have 2
Bobsy Formula Vee body molds myself and know the location of several
others. I will share all of this info on the Bobsy Formula Vee Registry in
the near future. Having a source for the seats would be a welcome
addition. Dave
On Wed, March 20, 2019 00:14, Don Anderson wrote:
Troy,
I have the mold for the original Bobsy SR 3 to 6 fiberglass seats, which
were all the same. They bolt directly to the floor pan with two 1/4" pan
head screws, and to the firewall with two 1/4 screws through an aluminum
square tube spacer to space the top out. Attached is a photo of 2 bare
fiberglass seats from my SR5 (with SR5 mounts, NOT SR3), and the same
seats with upholstery installed in my Bobsy-Porsche SR3. The bolts/screws
are under the upholstery. Don
On Tue, Mar 19, 2019 at 8:41 PM Redacted sender gonridn2 for DMARC <
dmarc-noreply@xxxxxxxxxxxxx> wrote:
Can anyone share pics of seats mounted in their SR3? Not the usual
bead/foam seats poured into the cockpit but bolted-in hardshell seats
(fiberglass/aluminum). How did you attach them to the chassis?
Troy
www.freelists.org/archive/bobsy_talk/. >>To unsubscribe to Bobsy Talk go toTo see an archive of past Bobsy Talk emails at